YAMAHA RZ350 GP REPLICA YZR 500 CONVERSION FAIRINGS, BODYWORK, KIT, FAIRING, TAIL, UPPER, LOWER, LEFT, RIGHT, MID, SEAT, PARTS, WINDSHIELD, TZ 125, 250, 750, TA, TD, YSR, RD 350, 400, LC, RZ, SR 500, FZ 700, FZR 600, 750, 1000, FAZER, YZF 600 R6, 1000 R1, CONVERSION KIT, REBODY, RACE, DRAG BIKE

All Prices are listed at the bottom of the page


	Do you have an old tired RZ 350 and just can't bear to get rid of it because it is such an awesome little bike? Why not update the styling a little bit to our YZR 350 body kit! This conversion kit makes your ugly RZ look like a YZR 500 GP race bike. Included in the kit is the main fairing assembly and a front fairing stay, windscreen, headlight, headlight buckets, rear seat, seat bracket, license plate bracket, seat pad, and front tail light and front fenders converts your RZ in an afternoon and you will be riding your new bike tomorrow! The white/orange bike at the top belongs to Matt Taylor (WA), the 2006 OMRRA Small bore classic superbike champion. See more pics in the customer gallery. Sold as a complete set or tail only.
	That's Ray Smith on the left giving his little RZ the berries. Check out some larger shots and his feedback in the customer gallery.
	YZR350 Yamaha RZ350 YZR GP Replica Conversion kit This complete kit consists of the following pieces: - endurance-style upper - supersport lower - mounting brackets - windscreen - headlight bucket - DOT-approved Hi-Lo headlight - tail piece - seat support bracket - taillight - ~~closed cell foam pad~~ - front fender - license plate bracket - hardware Available separately: - Additional fairing screws to connect upper & lower (need 6). - Windscreen screws Price

	YZR3502 Yamaha RZ350 YZR GP Replica Tail-only kit - tail piece - seat support bracket - mounting bracket - taillight - ~~closed cell foam pad~~ - license plate bracket Price
	Mounting guidelines Front bracket: This bracket clamps on two the steering head with the provided U-bolt. The bracket has two dowels that slide down over the steering stop. It will connect to the upper fairing above the headlight. Click here for picture Middle bracket: The two L-shaped tabs reach up through the frame to the bolts on the coil mounts, the bracket than hangs down from those bolts. The ends of the bracket will connect to the recessed bosses on the sides of the upper fairing. Click here for picture Rear bracket: Bolts on to the tabs on the side of the chassis. Top holes then line up to recessed bosses on seat. The tail light/license plate bracket bolts to the inner fender mounting bolts. Click here for picture The fiberglass supper bracket goes right underneath the rider's butt, flat side down, to support rider's weight. Stick the seat on, reach up from the bottom and wiggle the support bracket around until it slides into the correct position. It can be rivited to the frame or epoxied to the seat, your choice.

Please note these very important items!

We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #	Description	Price
YAMAHA RZ350 YZR GP REPLICA CONVERSION
YZR350	YAMAHA RZ350 YZR GP REPLICA CONVERSION	$1,223.93
YZR3502	YAMAHA RZ350 YZR GP REPLICA CONVERSION - TAIL ONLY	$458.50

Looking for some updated Yamaha FZR 600 bodywork or YZF 1000 R1 or 600 R6 fairings? How about TZ 250 race fairings? Or an RD 350 or 400 cafe seat? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!