| 
|
Should
you be one of the fortunate few who actually own one of Yamaha's
infamous four piston two-stroke road racers, consider yourself
lucky.
Should you be so unfortunate to need bodywork for the beast,
we are going to make your day! Because we carry what is without
question the largest selection of bodywork for the TZ700, TZ750
and TZ500. So call us today if you want to pick up bodywork
for one of these vintage racers!
|
|
TZ700A1
Yamaha TZ700 TZ750 A B race fairing
The original
TZ 750 A and B model fairings are available. This is a three piece
fairing assembly. There's a main fairing section, belly pan, and
a triangular piece that fits behind the forks and directs air
to the radiator.
Price |
|
TZ7501
Yamaha TZ750 Endurance upper fairing - upper with headlight opening
only.
This ultra rare endurance upper is available only from
Airtech. Matches the TZ7504 OW31 lower or can be made to work
with TZ7502 with some light modifications to the front lip.
Headlight openings: 5.25"
Price |
|
TZ7502
Yamaha TZ750 TZ500 fairing - European / wide
Price |
|
TZ750E
Yamaha TZ750 D/E race fairing
This is the Taylor version of the D/E fairing. The factory fairing
had a removable aluminum belly pan. The Taylor 2-piece design
has a molded in fiberglass one, so the lower is all one piece.
Price |
|
TZ7504
Yamaha TZ750 - OW31
Price |
|
TZ7504C
Yamaha TZ750 OW31 with hand cuffs - replacement upper
Price |
|
TZ7505
Yamaha TZ750 Taylor - no point on lower
Price |
|
TZ5001
Yamaha TZ500 fairing
Price |
|
VESCO2
Yamaha TZ750 race fairing
Arguably the
best fairing assembly for the TZ was the Vesco fairing. It consists
of three pieces, an upper with right and left lowers. The fairing
splits at the steering head and the lowers meet by the exhaust
pipe.
The upper fairing has bulged handcuffs, a larger windscreen area
for the rider to duck behind, and the lowers have a large intake
duct to cool the big engine.
Price |
|
VESCO3
Yamaha TZ750 Vesco Big Butt with rear lip
The seat shown
is the famous Veco 'Big Butt' seat. This particular seat is a
later model with the lip or kick up at the rear edge.
Price |
|
VESCO4
Yamaha TZ250 Vesco Big Butt no rear lip
This is the
earlier seat that doesn't have the lip that kicks up in the back,
the top is smooth and straight back.
Price |
| 
|
VESCO5
Vesco bottom mount for seat
Since the Big butt seats are a lot wider than standard TZ seats,
this bottom mount takes up the space between the frame and the
seat. Makes installation a snap and looks super clean!
Designed for VESCO4, earlier seat without the lip. Needs some
work to install with VESCO3 but can be done with some patience
(and bondo).
Price |
|
TZ7006
Yamaha TZ700 seat - twin shock
This is the early TZ700 seat for a twin shock chassis.
Price |
 |
TZ750DT
Yamaha TZ700 TZ750 Duck tail seat
This is the famous and near-impossible to find duck tail
seat for your TZ.
Price |
|
TZ750DTUP
Yamaha TZ700 TZ750 upholstery pan for TZ750DT
Price |
 |
TZ7506
Yamaha TZ750 A B C OW31 seat
This is the TZ750 race seat, with exhaust pipe cutout,
that tapers to a point in the back.
Price |
|
TZ7506W1
Yamaha TZ700 TZ750 OW31 seat
This is a neat two-piece assembly. The exhaust pipe inserts
were originally done in aluminum, our replica is fiberglass, ofcourse.
Price |
|
TZ5002
Yamaha TZ500 seat with exhaust pipe cutout
Price |
|
TZ5003
Yamaha TZ500 seat - no tailpipe cutout
This TZ500 seat was developed for use on TZ twins. Same
shape as the TZ5002, less the exhaust pipe cutout.
Price |
| 
|
TZADS3
Yamaha TZ750 Anti draft tail section
The third version
of the aero tail has sculpted sides and a straight top. Great
tail section for high speed tracks!
Shown
below on Skip Aksland and Dave Crussel's bikes.
Price |
|
TZFNDR1
Yamaha TZ fender
Price |
|
TZFNDR3
Yamaha TZ fender
Short version for radiator clearance
Price |
|
TZ700F1
Yamaha TZ700 TZ750 Front fender
Price |
|
TZ700F2
Yamaha TZ700 TZ750 Front fender
Price |
|
TZSTYLE
Yamaha TZ700 TZ750 Front fender - short
Price |
|
TZ7507
Yamaha TZ700 TZ750 Rear fender
Replacement rear inner fender for the TZ700 and TZ750.
Price |