YAMAHA TZ250 E F G 1978-'80, TZ 250 TZ 125, 250, 750, TA, TD, YSR, RD 350, 400, LC, RZ, SR 500, FZ 700, FZR 600, 750, 1000, FAZER, YZF 600 R6, 1000 R1, CONVERSION KIT, REBODY, RACE, DRAG BIKE

All Prices are listed at the bottom of the page

Airtech offers several different versions of the third-generation Yamaha TZ bodywork. We know you guys like options, so we provide you with them. God bless us.

Just contact us by phone, telegraph, or carrier pigeon and we will give you vital assistance in your restoration project or vintage racing effort!

TZ250EFG
Yamaha TZ250 Race fairing
We have an OEM replacement fairing TZ250EFG and our 'Low Boy' version TZ250EFGLB (see below) of the same assembly. Both of these are two piece designs with an upper and lower that split at the steering head. The 'Low Boy' version has the windscreen angled down to approximately the rider's shoulders, which help give it an aerodynamic advantage at fast tracks like Daytona or Road America.

The lowers are the same for both versions, flat-sided and beveled for increased ground clearance. The front is filled in to direct cooling air to the area around the cylinders.

Price

TZ250EFGLB
Yamaha TZ250 'Low Boy' Race fairing
The 'Low Boy' version has the windscreen angled down to approximately the rider's shoulders, which help give it an aerodynamic advantage at fast tracks like Daytona or Road America.

The lowers are the same for both versions, flat-sided and beveled for increased ground clearance. The front is filled in to direct cooling air to the area around the cylinders.

Price

TZ250G3
Yamaha TZ250 Race tail
T his is Yamaha's first pointed tail section design, it is distinguished by the little kick in the back.

Price

TZADS1
Yamaha TZ250 Anti draft tail section
Additionally, we have the TZ250 anti-draft seat originally designed by Floyd Emde, which was a factory test option in the late 70's and early 80's. These are super rare pieces and we believe that Airtech is the only company in the world reproducing this fine old TZ part. Damn, are we good, or what?

Price

TZADS2
Yamaha TZ250 Anti draft tail section
The second version of the Aero tail is 2" shorter and shaped slightly different.

Price

TZADS3
Yamaha TZ750 Anti draft tail section
The third version of the aero tail has sculpted sides and a straight top.

Shown below on a TZ750.

Price

SAR1
Yamaha TZ250 Sarron front fender
Christian Sarron, probably the most succesful French GP racer ever, won the 1984 250 GP title on his TZ250, that featured a different front fender as shown on the replica to the left. It will fit all TZ250s from '79 up to '90.
We've got this fender, and now so can you!

Price

Vesco TZ250 assembly

VESCO1
Yamaha TZ250 Vesco fairing
T his is Yamaha's first pointed tail section design, it's distinguished by the little kick in the back.

Price

VESCO3
Yamaha TZ250 Race tail
T his is Yamaha's first pointed tail section design, it's distinguished by the little kick in the back.

Price

VESCO4
Yamaha TZ250 Race tail
T his is Yamaha's first pointed tail section design, it's distinguished by the little kick in the back.

Price

VESCO5
Vesco bottom mount for seats
Since the Big butt seats are a lot wider than standard TZ seats, this bottom mount takes up the space between the frame and the seat. Makes installation a snap and looks super clean!

Designed for VESCO4, earlier seat without the lip. Needs some work to install with VESCO3 but can be done with some patience (and bondo).

Price

Please note these very important items!

We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advice.

Part #	Description	Price
YAMAHA TZ250 1978-'80 E F G
TZ250EFG	YAMAHA TZ250 FAIRING (UPPER & LOWER)	$414.00
TZ250EFGLB	YAMAHA TZ250 FAIRING - LOW BOY	$414.00
TZ250G3	YAMAHA TZ250 TAIL SECTION - G	$213.59
TZADS1	YAMAHA TZ250 TAIL SECTION - ANTI DRAFT	$213.90
TZADS2	YAMAHA TZ250 TAIL SECTION - ANTI DRAFT	$213.90
TZADS3	YAMAHA TZ750 TAIL SECTION - ANTI DRAFT	$213.90
SAR1	YAMAHA TZ250 CHRISTIAN SARRON FRONT FENDER	$89.90
VESCO1	YAMAHA TZ250 VESCO FAIRING TWINS 3-PIECE	$414.00
VESCO3	YAMAHA TZ250 VESCO TAIL SECTION - BIG BUTT WITH REAR LIP	$224.00
VESCO4	YAMAHA TZ250 VESCO TAIL SECTION - BIG BUTT NO REAR LIP	$224.00
VESCO5	VESCO BOTTOM MOUNT FOR VESCO3 AND VESCO4 TAILS	$138.00

Looking for some updated Yamaha FZR 600 bodywork or YZF 1000 R1 or 600 R6 fairings? How about TZ250 race fairings? Or an RD 350 or 400 cafe seat? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!