The Sprint RS is a well sorted sport touring bike and we now
have molds to keep yours looking good! The tail section and
solo seat cowl are the same as the Sprint ST model but the other
fairings are different. Not only do we make replacement parts
but we also offer the hard to find rear fender / hugger!
Give us a call today and we'll get your RS parts rolling.
2TS9RS1S
Triumph Sprint RS Upper fairing- street
Replacement upper fairing. We took the stock three pieces and
made them into a one-piece upper. Headlights and driving light
are cut open for your convenience. Please note there is no tab
work on the inside of this upper. The driving light can be installed
with silicone caulking (you can use epoxy but will be almost impossible
to remove later).The headlights are mounted on the metal fairing
bracket so no tabs are needed for installation.
If you
have any questions please ask your friendly sales rep at the time
of purchase.
.2TS9RS2
Triumph Sprint RS
Mid fairing - right Replacement right side fairing. We've molded in the
radiator shroud on the front leading edge so it's now one-piece.
2TS9RS3
Triumph Sprint RS
Mid fairing left Replacement left side fairing. We've molded in the
radiator shroud on the front leading edge so it's now one-piece.
2TS95
Triumph Sprint RS
Front fender This is our one-piece tail section for 2-up street
use with stock Triumph Sprint seat. Includes mounting tabs underneath
the seat pan. Please note we do not do the plastic darts/pushpins
on the inside of the panel, but you won't miss them. Once the
tail is installed using the tabs under the seat this one-piece
tail will be held in place securely. If you do still want to
install the plastic darts you could cut them out of the damaged
original plastics and epoxy them into our replacement tail section
or fabricate your own.
Please note:
we do not cut out the taillight opening to prevent
shipping damage. It is clearly scribed and can easily be cut
out with a Dremel or similar tool. Please ask your sales rep
if you have any questions.
2TS9RS6
Triumph Sprint RS Front fender Replacement front fender for the Triumph Sprint RS.
We've made the stock 2-piece fender into a 1-piece. Clean and
simple!
2TS9RS7
Triumph Sprint RS Rear swingarm fender Replacement rear swingarm fender/hugger for your Triumph
Sprint RS. This fender is designed specifically for the double
sided swingarm on the RS so this rear fender / hugger is different
from the one that fits the single sided swing arm on the ST
model.
2TS98
Triumph Sprint RS Solo seat cowl This solo seat cowl covers up the passenger parts of
the Triumph Sprint RS seat. The two plastic C-shaped lips on
the inside could not be replicated but a crafty guy can figure
out a way to install this cowl by epoxying in a small metal
bracket thats hooks underneath the upholstery.
We
sell an unfinished unpainted product, it is your responsibility
to sand, finish, and paint the parts you buy from us.
The
parts we sell are un-drilled; it is your responsibility
to drill all of the mounting holes and fit the parts
onto your chassis.
All
of our parts may or may not include the internal mounting
tabs. Please consult with our sales representative if
you have any questions about mounting things like headlights
and dashes.
It
is the purchasers' responsibility to mount all of the
products they purchase onto their machine. If you need
assistance mounting these products call our sales reps
for advise.
2TS9RS1S
2TS9RS2
2TS9RS3
2TS9RS4
2TS95
2TS9RS6
2TS9RS7
2TS98