The Sprint ST is one of the most popular sport touring bikes
ever and for good reason!
After many, many requests we finally caved in and made molds
for a complete replacement fairing set!
2TS91S
Triumph Sprint ST Upper fairing- street
Replacement upper fairing. We took the stock three pieces and
made them into a one-piece upper. Headlights, driving light and
turn signals are cut open for your convenience. Please note there
is no tab work on the inside of this upper. The turnsignals and
the small driving light can be installed with silicone caulking
(you can use epoxy but will be almost impossible to remove later).The
headlight is mounted on the metal fairing bracket so no tabs are
needed for installation.
If you
have any questions please ask your friendly sales rep at the time
of purchase.
2TS95
Triumph Sprint ST
Tail section - street This is our one-piece tail section for 2-up street
use with stock Triumph Sprint seat. Includes mounting tabs underneath
the seat pan. Please note we do not do the plastic darts/pushpins
on the inside of the panel, but you won't miss them. Once the
tail is installed using the tabs under the seat this one-piece
tail will be held in place securely. If you do still want to
install the plastic darts you could cut them out of the damaged
original plastics and epoxy them into our replacement tail section
or fabricate your own.
Please note:
we do not cut out the taillight opening to prevent
shipping damage. It is clearly scribed and can easily be cut
out with a Dremel or similar tool. Please ask your sales rep
if you have any questions.
2TS96E
Triumph Sprint ST Front fender - extended Replacement front fender for the Triumph Sprint ST.
We've molded in the popular 3.5" fender extender accessory
to keep your bike cleaner.
2TS98
Triumph Sprint ST Solo seat cowl This solo seat cowl covers up the passenger parts of
the Triumph Sprint ST seat. The two plastic C-shaped lips on
the inside could not be replicated but a crafty guy can figure
out a way to install this cowl by epoxying in a small metal
bracket thats hooks underneath the upholstery.
We
sell an unfinished unpainted product, it is your responsibility
to sand, finish, and paint the parts you buy from us.
The
parts we sell are un-drilled; it is your responsibility
to drill all of the mounting holes and fit the parts
onto your chassis.
All
of our parts may or may not include the internal mounting
tabs. Please consult with our sales representative if
you have any questions about mounting things like headlights
and dashes.
It
is the purchasers' responsibility to mount all of the
products they purchase onto their machine. If you need
assistance mounting these products call our sales reps
for advise.
2TS91S
2TS92
2TS93
2TS94
2TS95
2TS96E
2TS97
2TS98