screamer turned out to be a hoot in the twisties, and more than
one was sacrificed to the canyon / track gods. No worries, Airtech's
got your back. We make a 2-piece front fairing with oil containment,
a race tail with a seperate solo seat cowl, fenders and a very
clean looking lightweight undertail.
Triumph Daytona 600 supersport upper fairing
This is the upper fairing to our two-piece race fairing assembly
for the Triumph Daytona 600. This piece is the upper headlight
area with the headlight holes filled in and half of the right
and left lowers and the radiator shroud all molded as a one-piece
unit. This fairing splits with the upper and lower down around
the base gasket of the cylinders.
This allows you to remove the fairing assemblies very quickly
and makes for a smooth clean design because you don't have any
parting seams up by the handlebars or around all of the radiator
shrouding. This piece only works with our TD6SS2 lower fairing.
Triumph Daytona 600 supersport lower fairing
This is the bottom half to our two-piece super sport race faring
assembly for the Triumph Daytona 600. This piece is the bottom
right and left lowers, the front radiator shrouding, and the oil
containment belly pan all molded as a one-piece unit. This faring
is cut open on the left hand side for your generators and does
have a side stand provision. This piece only works with our TD6SS1
Triumph Daytona 600 street tail section This is our lightweight one-piece tail section for the
Triumph Daytona 600.
Triumph Daytona 600 seat cowl Stock replacement for your solo seat cowl for the Triumph
Daytona 600. Also available in carbon fiber for a custom look!
Triumph Daytona 600 front fender Direct replacement for the stock Triumph Daytona 600
front fender. This fender is lighter than stock so your suspension
reacts faster. This fiberglass fender is also available in carbon
fiber. Ask one of our sales reps today.
Triumph Daytona 600 rear swingarm fender This fender mounts on your the Triumph Daytona 600
swing arm and keeps dirt and crud from being thrown up around
your shock and the back of your motor. As you can see we make
this fender in fiberglass, but it is also available in carbon
Triumph Daytona 600 undertail Remove all that heavy stock black plastic and lighten
up the back of your Triumph Daytona 600. This piece attaches
inside of our super sport race tail.
note these very important items!
sell an unfinished unpainted product, it is your responsibility
to sand, finish, and paint the parts you buy from us.
parts we sell are un-drilled; it is your responsibility
to drill all of the mounting holes and fit the parts
onto your chassis.
of our parts may or may not include the internal mounting
tabs. Please consult with our sales representative if
you have any questions about mounting things like headlights
is the purchasers' responsibility to mount all of the
products they purchase onto their machine. If you need
assistance mounting these products call our sales reps