 |
|
Back
in 1997 Kawasaki teamed up with Rob Muzzy of Muzzy Performance
in order to create a superbike based off the already extremely
potent ZX7R. The result was the Raptor, a hand-built machine of
which 35 original examples were made at the Muzzy facility in
Bend Oregon. Airtech has aquired the molds used on the Raptors
from Muzzy, including the very distinctive front air duct so we
may continue making the parts. Turn your ZX7R into a Raptor replica
or replace your original fairings, call us today for a quote.
|
 |
3ZX7RMR1
Raptor Street upper fairing
Street version of the upper fairing for the Muzzy Raptor.
Price
|
 |
3ZX7RMR1C
Raptor Race Upper fairing
This is a competition version of the Raptor fairing without headlight
openings for racing.
Price
|
 |
3ZX7RMR2
Raptor lower fairing-Street
This is a supersport lower fairing that pairs with our upper fairing.
Price
(This piece only works
with the 3ZX7RMR1C, or 3ZX7RMR1.)
|
 |
3ZX7RMR2R
Raptor lower fairing-Race
This is a supersport lower fairing that pairs with our upper fairing.
This is the race version for track use, we can install a dam in
the rear for a small surcharge.
Price
(This piece only works
with the 3ZX7RMR1C, or 3ZX7RMR1.)
|
 |
3ZX7RMR3
Raptor Front Air Duct
This is the very distinctive front air duct assembly used on the
Muzzy Raptors. The street version has the two indentions just
behind the duct opening.
(Also available in the original
carbon fiber)
Price
|
 |
3ZX7RMR3R
Raptor Front Air Duct Competition
This is the very distinctive front air duct assembly used on the
Muzzy Raptors for the track.
(Also available in the original
carbon fiber)
Price
|
 |
3ZX7RMRS
Muzzy Raptor- radiator shroud
This radiator shroud is a cool piece that fits around the fork
legs and helps direct air through the radiator instead of bleeding
off over the top of it.
Price
|
 |
3ZX7R4
Kawasaki ZX7R Supersport seat
This is a one-piece race tail for your Kawasaki ZX7R. We've basically
molded the left and right seat sides, solo seat cowl, and tail
light area as a one-piece unit. This tail is legal for most race
organizations and really cool for custom street bikes. Street
guys will cut the tail light hole and silicone in their tail light
then mount it on their chassis for that race bike look. This is
definitely the coolest tail section for the Kawasaki ZX7R out
there. Get yours today!
Price
|
 |
3ZX7R4SB
Kawasaki ZX7R Superbike seat
This is a one-piece race tail for your Kawasaki ZX7R. We've basically
molded the left and right seat sides, solo seat cowl, and tail
light area as a one-piece unit. It’s a super bike tail because
the seat pan area is filled in and flat for use with close cell
race padding, available here,
instead of the stock upholstery. This is a race legal tail section
for most racing organizations and is a cool tail section for custom
street bikes. Get one today!
To support the rider weight
you will need the under seat bracket that goes between the frame
and the seat pan (3ZX7R4B).
Price
|
 |
3ZX7R4B
Kawasaki ZX7R Support bracket
This bracket mounts onto the subframe to support the rider weight
when using our superbike seat (3ZX7R4SB).
Price
|
 |
3ZX7R5
Kawasaki ZX7R Front fender
Direct replacement for the Kawasaki ZX7R front fender. Just drill
the mounting holes, take off your heavy plastic piece, and install
our lightweight fiberglass fender. This fender is lighter than
stock so your suspension reacts faster. This fiberglass fender
is also available in carbon fiber. Ask one of our sales reps today.
Price
|
 |
3ZX7R9
Kawasaki ZX7R Undertail
Remove all that stock heavy black plastic and lighten
up the back of your bike. This piece can be attached inside of
your stock tail section or one of our race tails (requires trimming)
and cleans up the inside bottom of your bike. This is a must have
to finish off the underside of your bike.
Price
|