VF750 1983-85



Parts that are hard to come by are our specialty here at Airtech. The VF 700/750 is a wonderful bike and fairing parts are becoming scarce for this machine. We have a street replacement upper fairing with the headlight holes in place. For a full-coverage, custom look we have side panels that attach to the upper fairing and stretch all the way underneath the bike where they join underneath the exhaust pipes. The stock chin cowl is also offered. For your butt, we have a two-piece race seat that was supplied to Honda race bikes in the early 80's. You simply disassemble your stock seat, cut the foam, then reassemble your modified foam and upholstery onto our new seat pan. This gives the look of a stock seat while saving a ton of weight. Airtech's VF bodywork is hot stuff, call us today to turn your ratty VF into a clean classic, or just plain old save weight over the original bodywork. We like taking care of you. Call us today!

Honda Street Motorcycle

Street Upper

Back in the 80’s the plastic that was used by the bike manufactures was pretty brittle. Chances are yours are pretty busted up if you have anything left at all. You’re probably glad to know that we still make these parts. This fairing is an exact replica of a VF 700/750 Interceptor fairing. This a fairing mounts using the existing brackets and hardware. Simply drill the mounting holes, mount on your bike and go for a ride.

Honda Sport Motorcycle

Honda Sport Motorcycle


Sport Lowers

Originally the Interceptor just had the upper fairing and the little chin at the bottom, kind of stylish in the 80’s but naked by today’s standards. We have the solution for you. Our sport fairing assemblies are a 2-piece unit that replaces the lower chin fairing. These fairings extend from the upper fairing to cover up your engine and radiator and all the way down to the exhaust pipe giving your bike a more completed sports bike look. So if your flogging around an old Interceptor and you want to update the styling, these are the panels you need. Get yours today!

Honda Race Tail

Race Tail

If you were racing back in the 80's, you'll remember that the bike needed to look stock. Bone Stock! You couldn't run one of these one-piece race tails like you can today. So, we had to do a little bit of fudging and cheating. What we have here is a two-piece race tail for you Interceptor. It starts of with a fiberglass seat pan. You simply remove you upholstery and foam off of your stock seat assembly, then trim your foam in the seat pan area and cut the back passenger provision foam off. Then put your modified foam on to our fiberglass pan and use the upholstery to cover it all back up. What you wind up with is a really lightweight stock appearing seat assembly. Next you’ll take this seat and mount it on to our one-piece tail. Then take that Upholstery tail combination and stick it on to your chassis and go racing. Pretty slick, huh? So if you looking to lighten up your Interceptor street bike or your building a race replica, this is the part you need. Get yours today!


Honda Lower Chin

Lower Chin

This is an exact replacement part for the chin fairing on your Interceptor. These things get beat up pretty easily. The exhaust pipe even melts them a little bit. You’ll probably be glad to know that we still make this piece.

Honda Fork Guards

Fork Guards

These are an extremely rare part HRC that covers the lower fork legs. And you have probably only seen them on pictures of the factory road race bikes where did they get them back then well from us of course and now you can have them to.


Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advice.

Part #
VF750 1983-85
VF7501 UPPER-STREET $248.42
VF7502 LOWER-TWO PIECE $346.16

Looking for some Honda CBR fairings? A CB 750 cafe seat? Some RC 30 fairings? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!


To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices