Lord knows, its possible to go through
a lot of bodywork in a season of racing. Airtech was honored
when former world road racing champion Cork Ballington approached
us to make bodywork for his protege Robby Peterson and his 88'
RS 250. We manufactured bodywork for them after making molds
for the upper and lower fairings, the seat, and front fender.
All of this is still available to you, our cherished customer.
Robby Peterson went on to race for Team Marlboro Roberts, if
you use our stuff you might end up there too. In any case, if
you have one of these fine bikes that needs restoration or replacement
bodywork, call us and we'll help you out.
2RS2501 Honda RS250 Competition upperfairing This is a replacement part for the RS250
We sell an unfinished unpainted
product, it is your responsibility to sand, finish,
and paint the parts you buy from us.
The parts we sell are un-drilled;
it is your responsibility to drill all of the mounting
holes and fit the parts onto your chassis.
All of our parts may or may not
include the internal mounting tabs. Please consult
with our sales representative if you have any questions
about mounting things like headlights and dashes.
It is the purchasers' responsibility
to mount all of the products they purchase onto their
machine. If you need assistance mounting these products
call our sales reps for advise.
Looking
for some Honda CBR
fairings? A CB 750 cafe seat?
Some RC 30 fairings? Take a look at our
extensive collection. Airtech carries a full selection of street
and track fairings for most bikes!