HONDA NT650 HAWK 1988-90, RC30, RVF, fairings, bodywork, fairing, upper, lower, mid, seat side, race, street, fender, tail, undertail, tank

All Prices are listed at the bottom of the page


	The Honda NT 650 was one of the first modern naked bikes and was pretty ahead of it's time when it came out in 1988. A lot of people couldn't quite figure it out... not enough power or wind protection for a sportbike, but what's with the aluminum twin spar frame and the single sided swing arm? Now somewhat of as cult classic, the NT 650 is a more popular bike than ever. Airtech's always been a believer an we've been making fairings for the Hawk since day one. Shown on the left is our RC30-based custom fairing assembly that we developed for Kevin Erion to race in the AMA Lightweight Twins Championship. Regular RC30 fairings can also be made to fit, and we've listed them below.
	Finally, people have been putting the '91 RVF 750 fairings on their Honda NT650 Hawk. Pictured on the left in the yellow are our RVF 750 fairings in combination with the NT650 race tail. The aerodynamic advantage over the stock parts is definite. Plus, it just plain old looks cool. Whichever way your going, our fairing bracket kit (NT6504) will get you started mounting the fairing assembly of your choice onto your bike.
	NT6501 Honda NT650 Hawk Competition upper fairing This is completely custom stuff for the Honda NT650 Hawk. Kevin Erion approached Airtech when Two Brothers Racing was planning to race the Hawk in the AMA's lightweight twins class. We modified an RC30 race fairing to fit the NT650 Hawk. The upper has the headlight holes filled in, though they can still be cut out to accept a headlight, and the windscreen area has been raised an inch. Matches with NT6502 lower fairing. Price
	NT6502 Honda NT650 Hawk Competition lower fairing - belly pan This lower fairing has the RC30 vents filled in to make it into a smooth aerodynamic shape. Matches with NT6501 upper fairing. Price
	NT6503S Honda NT650 Hawk tail section We've molded the stock seat sides and seat assembly into one piece with little tabs added to create an area for a competition number. You could trim these off if you don't want them... The taillight needs to be cut out for street use. Please note the seat does not have the plastic darts on the inside towards the front. Call our techs for installation tips if you have questions. Price
	NT6503R Honda NT650 Hawk Race tail section This is a cool race tail that has the seat pan area filled in for use with closed cell racing foam, available through us. Price
	NT6504 Honda NT650 Hawk fairing bracket kit This kit is designed to mount a fairing assembly onto your NT650. The top fairing stay (large bracket) mounts onto the gas tank mount (a threaded bung behind the steering head). The long front stay mounts onto the flat spot on your stearing head and stick straight forward, you will have to drill and tap two 6mm holes there. The two side brackets install on the frame spars, we recommend crimping in riv nuts for these. These four brackets will mount the upper fairing to the bike, the lower fairing is then attached to the upper, usually with 3 or 4 fasteners on each side. Price
	NT6505 Honda NT650 Hawk Solo seat cowl This is the original accessory solo seat cowl for the Honda NT650 Hawk. Price
	This solo seat cowl can be easily installed by glueing two small "L" brackets to the inside with 2-minute epoxy or fiberglass. The brackets will hook under the upholstery and keep the solo seat cowl in place.
HONDA RC30 FAIRINGS
	RC301 Honda RC30 upper fairing - street This upper will work on your NT650, you will just need to find yourself some RC30 lights. Price
	RC301C Honda RC30 upper fairing - competition We've filled in the headlight area on this RC30 upper for race or custom street applications. Price
	RC302 Honda RC30 lower fairing - belly pan You can make this belly pan work on the NT650 as well, but it will take quite a bit of trimming because the ducts hit the motor and exhaust. If you don't want to do this extra work go with the NT650 lower, it will bolt right on to the RC30 upper. Price
HONDA RVF 750 FAIRINGS
	RVF1 Honda RVF 750 upper fairing - competition The steeper nose profile will give your bike a more modern look. Very popular for track use or custom street applications. Price
	RVF2 Honda RVF 750 lower fairing - belly pan Works with the RVF1 upper. Price

Please note these very important items!

We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #	Description	Retail
HONDA NT650 HAWK '88 - '90
NT6501	HONDA NT650 HAWK UPPER FAIRING - COMPETITION	$221.31
NT6502	HONDA NT650 HAWK LOWER FAIRING	$172.90
NT6503S	HONDA NT650 HAWK TAIL SECTION - STREET	$131.41
NT6503R	HONDA NT650 HAWK TAIL SECTION - SUPERBIKE	$197.60
NT6504	HONDA NT650 HAWK FAIRING MOUNTING BRACKET KIT (HAWK, RC30, RVF)	$210.00
NT6505	HONDA NT650 HAWK FAIRING SOLO SEAT COWL	$62.25
RC301	HONDA RC30 UPPER FAIRING - STREET	$262.80
RC301C	HONDA RC30 UPPER FAIRING - COMPETITION	$221.31
RC302	HONDA RC30 LOWER FAIRING	$207.20
RVF1	HONDA RVF 750 UPPER FAIRING - COMPETITION	$262.80
RVF2	HONDA RVF 750 LOWER FAIRING	$228.24

Looking for some Honda CBR fairings? A CB 750 cafe seat? Some RC 30 fairings? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!