NSR250 1988-94

Different strokes for different folks. In the case of the NSR 250, we're talking two-strokes, and they are certainly different. AirTECH makes bodywork for the NSR that mounts right up using your original hardware. Our competition one piece upper has the headlight and signal holes filled in. The same piece can be used on the street by cutting out the holes for lighting, whether it be your stock light or one of our aftermarket projector halogen units. The right and left lowers have the center radiator shroud molded right into them. We also sell the internal ducting that routes fresh air back up into the air box. A one piece race seat is also available for this oil-burner. Anyone interested in replacing damaged bodywork, getting outfitted for the track, or simply lightening your lightweight bike even further, need simply phone us. We are here to make your life easy.


Competition Upper

What we have here is the upper fairing for an NSR250 with the headlight and turn signal holes filled in for race purposes. Custom street bike guys like this because they can cut whatever kind of head light shape they desire in the front.

Right Lower

This is an affordable crash replacement panel for the NSR250. This piece incorporates the right panel and the inside radiator shroud all as a one-piece unit. It’s great for a race bike or a custom street bike. Get yours today!

Left Lower

This is an affordable crash replacement panel for an almost impossible piece to find. Replace you crashed or damaged body panels or get a pair for a custom street bike application. We’ve got what you need.

One Piece Race Tail

This is a super bike style of race tail for the NSR 250. The seat pan area has been filled for use with racing closed cell foam padding. The tail light hole has been filled in the back, but can be easily cut out for race purposes. So if your racing a little NSR250 or you want to do a race replica look for your street bike, this is the tail that you need. Get yours today.

Air Ducts
These ducts epoxy or silicone to the inside of your right and left lowers to route cold air into the carburetor area for added performance. Simply bond into your stock panels or into our lightweight race lowers. A lot of cool air forced into your carburetors equals added performance. Our ducts are a cheap performance upgrade for your little 250. Get yours today!


Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advice.

Part #
NSR250 1988-94














Looking for some Honda CBR fairings? A CB 750 cafe seat? Some RC 30 fairings? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices