TZ700 TZ750 TZ500 1974-'81

All Prices are listed at the bottom of the page

 

Should you be one of the fortunate few who actually own one of Yamaha's infamous four piston two-stroke road racers, consider yourself lucky.
Should you be so unfortunate to need bodywork for the beast, we are going to make your day! Because we carry what is without question the largest selection of bodywork for the TZ700, TZ750 and TZ500. So call us today if you want to pick up bodywork for one of these vintage racers!

TZ700A1
Yamaha TZ700 TZ750 A B race fairing
The original TZ 750 A and B model fairings are available. This is a three piece fairing assembly. There's a main fairing section, belly pan, and a triangular piece that fits behind the forks and directs air to the radiator.

Price

TZ7501
Yamaha TZ750 Endurance upper fairing - upper with headlight opening only

Price

TZ7502
Yamaha TZ750 TZ500 fairing - European / wide

Price

TZ750E
Yamaha TZ750 D/E race fairing

This is the Taylor version of the D/E fairing. The factory fairing had a removable aluminum belly pan. The Taylor 2-piece design has a molded in fiberglass one, so the lower is all one piece.

Price

TZ7504
Yamaha TZ750 - OW31

Price

TZ7504C
Yamaha TZ750 OW31 with hand cuffs - replacement upper

Price

TZ7505
Yamaha TZ750 Taylor - no point on lower

Price

TZ5001
Yamaha TZ500 fairing

Price

VESCO2
Yamaha TZ750 race fairing
Arguably the best fairing assembly for the TZ was the Vesco fairing. It consists of three pieces, an upper with right and left lowers. The fairing splits at the steering head and the lowers meet by the exhaust pipe.
The upper fairing has bulged handcuffs, a larger windscreen area for the rider to duck behind, and the lowers have a large intake duct to cool the big engine.

Price

VESCO3
Yamaha TZ750 Vesco Big Butt with rear lip
The seat shown is the famous Veco 'Big Butt' seat. This particular seat is a later model with the lip or kick up at the rear edge.

Price

VESCO4
Yamaha TZ250 Vesco Big Butt no rear lip
This is the earlier seat that doesn't have the lip that kicks up in the back, the top is smooth and straight back.

Price

VESCO5
Vesco bottom mount for seat
Since the Big butt seats are a lot wider than standard TZ seats, this bottom mount takes up the space between the frame and the seat. Makes installation a snap and looks super clean!

Designed for VESCO4, earlier seat without the lip. Needs some work to install with VESCO3 but can be done with some patience (and bondo).

Price

TZ7506
Yamaha TZ750 A B C seat
This is the TZ750 race seat, with exhaust pipe cutout, that tapers to a point in the back.

Price

TZ7006
Yamaha TZ700 seat - twin shock
This is the early TZ700 seat for a twin shock chassis.

Price

TZ750DT
Yamaha TZ700 TZ750 Duck tail seat
This is the famous and near-impossible to find duck tail seat for your TZ.

Price

TZ750DTUP
Yamaha TZ700 TZ750 upholstery pan for TZ750DT

Price

TZ7506W1
Yamaha TZ700 TZ750 OW1 style seat
This is a neat two-piece assembly. The exhaust pipe inserts were originally done in aluminum, our replica is fiberglass, ofcourse.

Price

TZ5002
Yamaha TZ500 seat with exhaust pipe cutout

Price

TZ5003
Yamaha TZ500 seat - no tailpipe cutout
This TZ500 seat was developed for use on TZ twins. Same shape as the TZ5002, less the exhaust pipe cutout.

Price

TZFNDR1
Yamaha TZ fender

Price

TZFNDR3
Yamaha TZ fender
Short version for radiator clearance


Price

TZ700F1
Yamaha TZ700 TZ750 Front fender

Price

TZ700F2
Yamaha TZ700 TZ750 Front fender

Price

TZSTYLE
Yamaha TZ700 TZ750 Front fender - short

Price

TZ7507
Yamaha TZ700 TZ750 Rear fender
Replacement rear inner fender for the TZ700 and TZ750.

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
YAMAHA TZ700 TZ750 TZ500 1974-'81
TZ700A1 TZ700 FAIRING - A B $333.44
TZ7501 TZ750 FAIRING - ENDURANCE (UPPER ONLY) $131.41
TZ7502 TZ750 FAIRING - EUROPEAN WIDE 500/750 $333.44
TZ750E TZ750 FAIRING - D & E $333.44
TZ7504 TZ750 FAIRING - OW31 $333.44
TZ7504C TZ750 FAIRING - UPPER ONLY WITH CUFFS TAYLOR OW31 $131.41
TZ7505 TZ750 FAIRING - TAYLOR - NO POINT ON LOWER $333.44
VESCO2 TZ750 FAIRING - VESCO 700/750 $333.44
TZ5001 TZ500 FAIRING $333.44
VESCO3 TAIL SECTION - VESCO BIG BUTT WITH LIP $145.23
VESCO4 TAIL SECTION - VESCO BIG BUTT NO LIP $145.23
VESCO5 BOTTOM MOUNT FOR VESCO3 AND VESCO4 $76.08
TZ7506 TZ750 TAIL SECTION - D F G H $183.07
TZ7006 TZ750 TAIL SECTION - TZ700 A B C $183.07
TZ750DT TZ750 TAIL SECTION - DUCK TAIL D E $183.07
TZ750DTUP TZ750 UPHOLSTERY PAN FOR DUCK TAIL SEAT TZ750DT $38.72
TZ7506W1 TZ750 TAIL SECTION - (76 TZ750 OWO1) $228.24
TZ5002 TZ500 TAIL SECTION WITH PIPE OPENING G H $228.24
TZ5003 TZ500 TAIL SECTION NO PIPE OPENING G H $183.07
TZFNDR1 TZ750 FENDER - FRONT $82.99
TZFNDR3 TZ750 FENDER - FRONT SHORT $82.99
TZ700F1 TZ700 FENDER - FRONT $82.99
TZ700F2 TZ700 FENDER - FRONT $82.99
TZSTYLE FENDER - FRONT (SHORT) $82.99
TZ7507 TZ750 FENDER - REAR $82.99

Looking for some updated Yamaha FZR 600 bodywork or YZF 1000 R1 or 600 R6 fairings? How about TZ250 race fairings? Or an RD 350 or 400 cafe seat? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

 

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices