RZ350 SOLO SEAT COWL INSTALL

All Prices are listed at the bottom of the page

This cool little cowl will fit over the rear part of the seat for a cool cafe race look. You remove the rear grab bar and stock rear tail plastics and install this cover.

 

The original Yamaha solo seat cowl came with two simple brackets, which are no longer available so you will have to fabricate them. They are shown on the original Yamaha installatio instructions to the left. That sheet is pretty vague so below you will find some pictures that show what you'll need to fabricate and where the brackets install.

Picture credits to the excellent RD/RZ forum www.rzrd500.com !

The picture above shows an OEM seat cowl and the two brackets. Note the two rubber grommets for installation of the OEM matching lumbar pad. We've made our seat cowl come straight accross the front to make it easier to make your own lumbar pad or simply add a piece of race foam.

This shows how the brackets are mounted to the seat itself.

The brackets screw into the threaded plate on the original seat latch. You have to poke a hole in the vinyl to feed the screw through.

Note the two tabs at the top that are bent in 90 degrees. They will pick up the seat cowl right above the surface of the seat.

You can see the two screw heads just underneath the grommets.

With lumbar pad installed.

If you have any further questions, please let us know!

Back to RZ350 page


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Home | About Our Products | Copyright | Prices