RZ350 1984-86

All Prices are listed at the bottom of the page

You've just died and gone to RZ350 heaven! Or RD350 LC heaven we guess, depending on your geographic location. Just past the gates we have the stock replacement quarter fairing. If you'd like the stock lower chin cowl on the side, we can of course accommodate you.

A cloud or two over you'll find our OW-style full fairing assembly we make for your little water-cooled twin. It is a four piece design with an upper and lower that splits at the cylinder base basket. Two handcuffs are then pop-riveted onto the handlebar area. This particular assembly comes with left and right radiator exhaust vents.

Air intake ducts grace the side of the bike, one for the clutch on the right, and the other on the left for the dyno. A fuller windscreen offers better aerodynamics and gives the rider more wind protection. The stock headlight can be used in the round headlight area.

To put the whole package together, Airtech has a fairing bracket kit available. A dash of mechanical ability will be required to install this assembly in a professional fashion. It is certainly worth the effort since this is by far the most tasteful fairing available for the RZ 350.

To cap off the project, our one piece race seat can be fitted. It features a closed seat pan ready to accept our cool closed cell foam padding for a real racy look. The tail light area has been filled in but can be easily cut out for street use.

Lots of different bodywork have been put on RZ's, and TZ's are pretty happy donors. Shown on the left is an RZ with a TZ750 OW031 front fairing and our OW70 style one-piece tail. We would recommend our TZ250S fairing assembly for a nice tight fit on a track or custom street bike, you'll just have to cut out a headlight hole.

We'll do you one better, how about our sharp looking YZR conversion kit for your good ole' RZ350, shown off on the left in Marlboro GP guise.

 

 

Now it's time for you to return back to earth, there is work left to do for you. Bodywork. Buy some of the finest fiberglass available... only at Airtech.

RZ3501
Yamaha RZ350 RD350 LC YPVS Quarter fairing
Replacement quarter fairing

Price

RZ3503
Yamaha RZ350 RD350 LC YPVS Chin scoop
Replacement chin scoop.

Price

RZ3507
Yamaha RZ350 RD350 LC YPVS Solo seat cowl - street
This cool little cowl will fit over the rear part of the seat for a cool cafe race look. Just nix the grab bar and bolt this baby on.

Price

RZ3508
Yamaha RZ350 RD350 LC YPVS Fuel tank
Shave pounds off the top of your bike by replacing the heavy stock steel tank with one of our lightweight racing tanks. Bolting on one of these tanks will really help you flick the bike left and right. Comes with a nice polished stainless twist off cap and a 3/8 fuel bung ready to accept a Pingel fuel valve, available through us.

PLEASE NOTE
This fuel tank is not recommended for street use, this is a fiberglass fuel tank that will not dent. It is possible that the fuel tank will rupture and spill fuel possibly catching your motorcycle on fire if you happen to crash on the street. This lightweight racing fuel tank is recommended for racing purposes, with racing fuel, only! Read more…

Price

RZ3502
Yamaha RZ350 RD350 LC YPVS OW70 fairing
This is the OW-style full fairing assembly we make for your RZ350. It is a four-piece design with an upper and lower that splits at the cylinder base basket. Two handcuffs are then pop-riveted onto the handlebar area. This particular assembly comes with left and right radiator exhaust vents. Air intake ducts grace the side of the bike, one for the clutch on the right, and the other on the left for the dyno. A fuller windscreen offers better aerodynamics and gives the rider more wind protection. The stock headlight can be used in the round headlight area.

Price

RZ3504
Yamaha RZ350 RD350 LC YPVS OW70 fairing bracket kit
This kit includes the upper and lower mount. The main fairing stay that clamps onto your headstock with 2 large U-bolts.

Price

RZ3505
Yamaha RZ350 RD350 LC YPVS OW70 tail
This is our one piece race seat. It features a closed seat pan ready to accept our cool closed cell foam padding for a real racy look. The tail light area has been filled in but can be easily cut out for street use.

Price

TZ250S1
Yamaha RZ350 RD350 LC YPVS TZ250 S Fairing assembly - competition
This is the TZ fairing we recommend for the RZ. It's a TZ250 S-model fairing assembly with a nice tight fit. Great for the track or for a custom street bike, you'll just have to cut out a headlight hole.

Price

YZR Conversion kit

Do you have an old tired RZ 350 and just bear to look at it's tatty bodywwork anymore? Wanna make it look like a YZR500 GP bike? Check out our awesome YZR conversion kit!

Click here for more pictures and info

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
YAMAHA RZ350 1984-'86
RZ3501 YAMAHA RZ350 FAIRING-STREET $103.75
RZ3503 YAMAHA RZ350 CHIN COWL $82.99
RZ3502 YAMAHA RZ350 "OW70" FAIRING $359.64
RZ3504 YAMAHA RZ350 "OW70" FAIRING BRACKET KIT $210.00
RZ3505 YAMAHA RZ350 TAIL SECTION $200.56
RZ3506 YAMAHA RZ350 "OW70" WINDSCREEN $99.95
RZ3507 YAMAHA RZ350 SOLO SEAT COWL-STREET $78.70
RZ3508 YAMAHA RZ350 FUEL TANK $553.28
TZ250S1 YAMAHA RZ350 FAIRING - COMPETITION (TZ250S)  $318.40
YZR350 YAMAHA RZ350 YZR CONVERSION KIT $795.00
YZR3502 YAMAHA RZ350 YZR CONVERSION TAIL SECTON ONLY KIT $318.40

Looking for some updated Yamaha FZR 600 bodywork or YZF 1000 R1 or 600 R6 fairings? How about TZ 250 race fairings? Or an RD 350 or 400 cafe seat? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices