DIRTTRACK & SPEEDWAY


Dirt track seats? Yep! You know what they fit? Good, 'cause we're not always sure, especially with the cool vintage ones we sell! People keep bringing them to us and wanting us to make more for them. If you want one just call us and we'll send it to ya!

GNC1 / Expert class

 

When AMA Pro Kayl Kolkman asked us to help him out with some new bodywork for his C&J framed Kawasaki Twin, we jumped right on it. This stuff will fit a C&J frame of course and should work well on similar "Bear" or C&M frames as well. The tank is specific to the C&J Kawasaki Twin frame.

We made an updated seat and tank design and also some pretty cool extended fork guards that will fit Ceriani forks or similarly shaped modified modern conventional forks like the R6 units Kayl uses.

DTS1
GNC1 Dirttrack seat
- C&J - square number plates

Overall length: 27"
Seat pan lenght: 13" (front to kink in number plate)
Width front: 6"
Widest point: 12"

Front to rear mounting points 22.5"
Vertical rise in frame from seat area to mounting points (you can see the two mounting screws in the bottom pic): 3"

More photos

Seat foam

Price

DTS2
GNC1 Dirttrack seat
- C&J - slanted number plates

Overall length: 27"
Seat pan lenght: 12"
Width front: 6"
Widest point: 12"

More photos

Seat foam

Price

DTBB
Dirt track battery box / electronics tray - C&J

Not a battery box on this bike but a thin, lithium ion race battery may fit inside. Plenty of room for your electronic components like ECU and FI controller.

Part comes un-trimmed but scribed at the red line in the picture.

Price

DTFG1
Dirttrack Fork Guards
Fit Ceriani style forks and similarly shaped modified modern conventional forks like the R6 units Kayl uses.

Shown here in optional carbon fiber, ask your sales rep for a price.

Price

DTFG2
Dirttrack Fork Guards
This cool new design extends past the forks and comes back to a taper. Not only does that offer 360 degree protection for your fork sliders but it's also a really nice large surface for those important sponsor decals - and ad space is at a premium on these bikes as you well know!!

Fit Ceriani style forks and similarly shaped modified modern conventional forks like the R6 units Kayl uses.

Price

DTT1K - Racing fuel tank for C&J Kawasaki
This fuel tank has enlarged capacity for longer tracks and can be supplied with either 3/8" bungs or a fuel pump flange (for Kawasaki EX650 fuel pump).

More photos

We can supply your with the crossover fittings for your fuel tank as pictured below, please ask your sales rep!

CB750 Dirt Tracker

Want to do something different with your CB750? How about building a dirt tracker? Better yet, slap some street tires and lights on it and make it a street tracker!

Parts listed below, but click here to see CB750 Dirt Track parts and video

CB750DTT
CB750 Dirt track fuel tank

Tank fits '69-'77 SOHC CB750K models. Seat will fit many other years and models.

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

CB750DTS
CB750 Dirttrack seat

Classic dirttrack style seat adapted to fit the CB750 frame.

Price

 

CB750DTOT
CB750 Dirt track oil tank

Really trick lightweight oil tank with integrated inner rear fender. You will need to trim the flange around the top of the tank to match the frame contour so it fits between the frame tubes.

Comes epoxy coated, with a billet oil cap, 1/4" vent fitting on top and 2x 3/8" fittings on bottom.

Please note: Requires custom oil lines. We recommend you cut the ends of the stock lines on the motor side and have them put into new hoses. On the tank end you will need AN to 3/8" NPT adapters.

Price

 

DTFG
Dirt Track Fork Guards (pair)
Gotta have these for that dirt track look! Originally for Ceriani forks. Can be trimmed for use on stock forks.

Price

 

Harley Davidson XR750

The iconic XR750... the original design still stands after 30 years. We make a lightweight racing tank and the classic seat. Get your hands on some of this good stuff today...

XR7502DT
Harley XR 750 Dirttrack seat

Overall length: 27.5"
Seat pan lenght: 17"
Width front: 6"
Widest point: 10.5"

More photos

Seat foam

Price

XR750DTT
Harley XR750 Fuel tank
Racing fuel tank. Comes with a 3/8" NPT bung to work with a Pingel fuel valve.

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

Price

Harley Davidson Sportster

HDSXRDTT
Harley Sportster XR750 dirttrack tank

This is the XR750 replica tank for your Sportster. The XR750 frames had a very skinny (1") backbone so the original XR750 tank would not fit onto the stock Sportster frame (1.65").

For this conversion tank, the original XR750 top shell is used so from the outside it is identical to the original. But we have redesigned the tunnel to fit this tank to a standard Sportster frame.

You will need to weld two tabs to the frame for the stud mounts. The rear of the tank has an insert so you can attach a bracket or hold down strap.

Price

HDSXRDTS
Harley Sportster XR750 dirttrack seat with taillight bracket.
We designed this XR750 conversion seat that conforms perfectly to the tapered Sportster frame. Cut a slot in the recessed mounting point in the front and slide it underneath the stock seat mount on the frame. Two bolts through the rear fender mount struts complete the mounting process. Simple!
This seat comes with a taillight/licenseplate bracket that you can position to your liking and bond in place with Bondo or epoxy.

Please note: designed for the '86-'94 Sportster with removable fender struts. Will fit '95-03 Sportster but welded on fender support struts will need to be cut and stubs will remain exposed. Will not fit '04-up rubber mount Sportster - subframe is too wide throughout.

Price

HLR12 Black LED taillight - Red lens
Cool slim LED taillight to tuck in underneath a cafe seat or dirt track seat but will also mount directly onto a fender. Aluminum license plate bracket, red lens. Built in resistor board.

12V, 3-wire
Yellow=ground
Black=running
Red=brake

Width: 4"
Height: 1-1/8"
License plate bracket: 6-3/4" x 1-7/8"

License plate light: yes

Price

XR7502DT
Harley XR 750 Dirttrack seat
What can we say... the classic XR750 dirt track style racing seat. Lightweight and strong. Requires fabrication of seat mounts to fit onto Sportster frame but is fairly straight forward to install.
Overall length: 27.5"
Seat pan lenght: 17"
Width front: 6"
Widest point: 10.5"

More photos

Seat foam

Price

RS750

The inspiration: '84 Honda RS750

By the mid-1980s, the name Honda was synonymous with winning almost every style of racing in the world. There was one type of American racing that eluded Honda, though: dirt track.

American Honda began development of a 750 based on an XLV750R dual-sport bike sold in Europe, a model powered by a liquid-cooled 52-degree SOHC 742cc V-twin. The RS750 racer was entirely hand-built around this engine, from its massive oil sump to its long intake runners and super-wide swingarm able to accommodate a fat Goodyear tire.

The result? The RS750 won its first race at the 1983 Du Quoin Mile. The following year, Honda RS750 riders Bubba Shobert and the late Ricky Graham won six races each, with the Grand National Championship going to Graham by a single point over Shobert. The next three years were all Bubba’s though, as he took the title in 1985, 1986 and 1987, making it four in a row for Honda and its RS750. Honda officially departed in 1988, but Graham went on to win one more title with the RS750 in 1993 as a privateer, bringing Honda’s total of GNCs to five. Honda’s persistence, creativity and technical know-how made the RS750 a winner from the very start.

Source: powersports.honda.com

RS7501
RS750 Dirt track seat.

Overall length: 30"
Seat pan lenght: 13"
Width front: 7.5"
Widest point: 8.5"

More photos

Seat foam

Price

RS7502
RS750 Dirt track seat w/ number plate

Overall length: 27"
Seat pan lenght: 10.5"
Width front: 6.75"
Widest point: 9"

More photos

Seat foam

Price

Universal parts

We love a good project here at Airtech so we've got you covered... Here's our ever growing list of seats with measurements for all you fabricators out there...

Call us if you need help with your selection!

CB750DTS
Dirt track seat

Overall length: 28"
Seat pan lenght: 17"
Width front: 7.75"
Widest point: 10"

More photos

Seat foam

Price

DTS
Dirt track seat C&J

Overall length: 27"
Seat pan lenght: 12"
Width front: 4.5"
Widest point: 10" (12" at number plates)

More photos

Seat foam

Price

DTS4
XR750 Dirt track seat - no tabs

Overall length: 27.5"
Seat pan lenght: 17"
Width front: 6"
Widest point: 10"

More photos

Seat foam

Price

DTS5
Dirt track seat

Overall length: 27"
Seat pan lenght: 17"
Width front: 7.5"
Widest point: 10.5"

More photos

Seat foam

Price

DTS6
Dirt track seat

Overall length: 25.5"
Seat pan lenght: 16"
Width front: 6"
Widest point: 9.5"

More photos

Seat foam

Price

DTS7
Dirt track seat with number plates

Overall length: 27.5"
Seat pan lenght: 17"
Width front: 6"
Widest point: 12"

More photos

Seat foam

Price

XR7502DT
Harley XR 750 Dirttrack seat

Overall length: 27.5"
Seat pan lenght: 17"
Width front: 6"
Widest point: 10.5"

More photos

Seat foam

Price

XSDTS1
XS650 Dirttrack seat

Overall length: 26.5"
Seat pan lenght: 17"
Width front: 5"
Widest point: 10" (13" at shock bulges)

More photos

Seat foam

Price

XTDTT
Yamaha XT 500 dirttrack tank
This tank fits oil in frame bikes like Yamaha SR500 and XT500. It's got a big tunnel so will fit many other bikes too!

Overall length: 19"
Width at back: 6"
Widest point: 9.25"
Tunnel dimensions
Tunnel length: 15"
Tunnel width: 3"
Tunnel depth: 7"

Known fitment: Yamaha XT 500

More photos

Price

Hybrid tracker/cafe

Our "Laguna Seca" seats hail from the days when road races included sections of loose gravel, dirt or even beach. They're long like a tracker seat but have a sharply defined bum stop like a road race seat.
Laguna Seca seat on an XJR1300 - pic: Pete Cagnacci - as featured on Pipeburn

VSM6
Vintage seat medium - Laguna Seca long

Overall length: 32.5"
Seat pan lenght: 21.5"
Width front: 7"
Widest point: 10.5"

More photos

Seat foam

Price

VSM7
Vintage seat medium - Laguna seca wide

Overall length: 27"
Seat pan lenght: 15.5"
Width front: 7"
Widest point: 10.5"

More photos

Seat foam

Price
Additions

SEATPAN
Custom seat pan
Don't see a seat pan listed for the seat you want? We can make you a custom seat pan! All your parts are made to order so what we do is make your seat, then "splash" a perfectly matching seat pan. Install it with the seat pan studs below.

Ask your sales rep at the time of the order!

Price

FS4L
Seat foam sheet 3/4" - long 12x26"
This is what you want for 9 out of 10 cafe seats. It is tough enough to use without an upholstery and comfortable enough for longer rides - all things are relative off course, if you just got off your gel seat lazy boy megacruiser, you may disagree.

Visually, 3/4" is just about the perfect thickness. Run it as a stand alone seat pad for that race look or use it as a base for a custom upholstery job. It will not collapse like cheap automotive seat foam!

We use this on some of our track bikes too.

Peel & stick adhesive.

We sell a few different sizes, look here.

Price

NPS2
Number plate with headlight bucket
Turn your dirt tracker into a street tracker with this square numberplate that has an angled flat surface that can be used to mount a small square (or two small round) headlights, as shown on the yellow bike below.


The numberplate comes with a separate backing plate that will help mount the light and hide some wiring. You can bond the backing plate in place with clear silicone caulking.

Price

 

NPS1
Number plate square
10"x12" plate, 2" radius corners

Price

DTFG
Dirt Track Fork Guards (pair)
Gotta have these for that dirt track look! Originally for Ceriani forks. Can be trimmed for use on stock forks.

Price

 

SPS1 Seat pan studs (4pc.)
These studs have a large perforated head which makes them perfect for mounting seat pans to seats or various blind mounts on the inside of panels. You can fiberglass or epoxy them into place. 3/4" long, 1/4"-20 thread, nylocks included.

Watch the installation video

See more fasteners

Price

Speedway

 

Our mold collection is so extensive, we're not even sure what some of them are for. These speedway bike pieces were items we were asked to build some time ago. If you race speedway machines, you may recognized exactly what they are. We have both long and short front fenders, a rear fender that might also double as a seat part.

Some dirttrack fenders are listed in our Vintage fenders section. Click here to take a look at the Vintage dirt fenders.

Lastly, we've got what looks like a motor guard to keep dirt and debris from smacking into your engine.

We also recently made some parts for World Champion Billy Hammill, shown in action above!

SFF
Speedway front fender - Billy Hamill

Price

 

SLF
Speedway front fender - long

Price

 

SSF
Speedway front fender - short

Price

 

SMG
Speedway motor guard

Price

 

SRF
Speedway rear fender

Price

 

SRF2
Speedway rear fender - Billy Hamill

Price

 

 

Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
GNC1 / EXPERT CLASS
DTS1 DIRT TRACK SEAT C&J - SQUARE NUMBER PLATES $159.07
DTS2 DIRT TRACK SEAT C&J - SLANTED NUMBER PLATES $159.07
DTBB DIRT TRACK BATTERY/ELECTRONICS BOX - C&J $82.99
DTFG1 DIRT TRACK SEAT FORK GUARD $82.99
DTFG2 DIRT TRACK SEAT FORK GUARD - LONG $95.00
DTT1K DIRT TRACK FUEL TANK C&J - KAWASAKI $604.87
VINTAGE DIRT TRACK SEATS
CB750DTS
HONDA CB750 DIRT TRACK SEAT
$131.41
DTS DIRT TRACK SEAT C&J $159.07
DTS4 DIRT TRACK SEAT 4 $103.75
DTS5 DIRT TRACK SEAT 5 $103.75
DTS6 DIRT TRACK SEAT 6 $103.75
DTS7 DIRT TRACK SEAT 7 $159.08
RS7501 RS750 DIRT TRACK SEAT $159.07
RS7502 RS750 DIRT TRACK SEAT W/ NUMBER PLATE $159.07
XR7502DT HARLEY XR750 DIRTTRACK SEAT $103.75
XSDTS1 XS650 DIRT TRACK SEAT $159.08
HYBRID TRACKER / CAFE
VSM6 VINTAGE SEAT MEDIUM 6 - LAGUNA SECA (LONG) $131.41
VSM7 VINTAGE SEAT MEDIUM 7 - LAGUNA SECA (WIDE) $131.41
VINTAGE DIRT TRACK TANKS
CB750DTT
HONDA CB750 DIRT TRACK FUEL TANK - SOHC
$493.59
CB750DTOT
HONDA CB750 DIRT TRACK OIL TANK - SOHC
$493.59
HDSXRDTT HARLEY SPORSTER XR750 DIRT TRACK FUEL TANK $501.13
XR750DTT HARLEY XR750 DIRT TRACK FUEL TANK $501.13
XTDTT YAMAHA XT500 DIRT TRACK TANK $501.13
ADDITIONS
HLR12 BLACK LED TAILLIGHT - RED LENS $39.95
DTFG
DIRT TRACK FORK GUARDS
$82.99
NPS1
SQUARE NUMBER PLATE 10X12"
$27.62
NPS2
SQUARE NUMBER PLATE WITH HEADLIGHT BUCKET
$62.25
SEATPAN CUSTOM SEAT PAN $45.00
FS4L SEAT FOAM SHEET 3/4 " - LONG 12X26' $49.00
SPS1 SEAT PAN STUDS 1/4"-20 (4) $9.95
SPEEDWAY
SSF SPEEDWAY SHORT FENDER $48.41
SLF SPEEDWAY LONG FENDER $62.25
SFF SPEEDWAY FRONT FENDER - BILLY HAMILL $82.99
SMG SPEEDWAY MOTOR GUARD $48.41
SRF SPEEDWAY REAR FENDER $82.99
SRF2 SPEEDWAY REAR FENDER 2 - BILLY HAMILL $82.99


To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices