The Sprint ST is one of the most popular sport touring bikes
ever and for good reason!
After many, many requests we finally caved in and made molds
for a complete replacement fairing set!
Triumph Sprint ST Upper fairing- street
Replacement upper fairing. We took the stock three pieces and
made them into a one-piece upper. Headlights, driving light and
turn signals are cut open for your convenience. Please note there
is no tab work on the inside of this upper. The turnsignals and
the small driving light can be installed with silicone caulking
(you can use epoxy but will be almost impossible to remove later).The
headlight is mounted on the metal fairing bracket so no tabs are
needed for installation.
have any questions please ask your friendly sales rep at the time
Triumph Sprint ST
Tail section - street This is our one-piece tail section for 2-up street
use with stock Triumph Sprint seat. Includes mounting tabs underneath
the seat pan. Please note we do not do the plastic darts/pushpins
on the inside of the panel, but you won't miss them. Once the
tail is installed using the tabs under the seat this one-piece
tail will be held in place securely. If you do still want to
install the plastic darts you could cut them out of the damaged
original plastics and epoxy them into our replacement tail section
or fabricate your own.
we do not cut out the taillight opening to prevent
shipping damage. It is clearly scribed and can easily be cut
out with a Dremel or similar tool. Please ask your sales rep
if you have any questions.
Triumph Sprint ST Solo seat cowl This solo seat cowl covers up the passenger parts of
the Triumph Sprint ST seat. The two plastic C-shaped lips on
the inside could not be replicated but a crafty guy can figure
out a way to install this cowl by epoxying in a small metal
bracket thats hooks underneath the upholstery.