YOSHIMURA TORNADO '86-'87

All Prices are listed at the bottom of the page

This is some of the coolest and most exclusive bodywork available for the classic first generation Gixxer chassis ('86-'87 GSXR 750). The street upper is molded with headlight buckets in one seamless piece and has louvered sides. Very trick indeed. The lower section fits perfectly and is also a one piece unit.

For your sitting pleasure, the solo seat unit can be upholstered or covered with closed cell foam. There is an opening for the tail light.

We've even got a slick fuel tank, for Pete's sake. It is longer than the stock tank with a lower profile and rounded in the back.

The front fairing, seat and fuel tank require special bracket fabrication!

YT1
Yoshimura Tornado GSXR 750 Upper fairing
This is the Yoshimura Tornado style bodywork for the GSXR 750. Works only with the YT2 lower belly.

Takes a special windscreen & headlight cover and requires bracket fabrication. It does not use the stock GSXR headlight (we've been told CiBie makes a light that fits).

Price

 

YT2
Yoshimura Tornado GSXR 750 Lower fairing
This is the lower belly pan that fits the YT1 Yoshimura Tornado upper fairing.

Price

YT3
Yoshimura Tornado GSXR 750 Tail section

This is a real cool designed tail section for the first generation of GSXR chassis. This will not work with a stock GSXR gas tank, because the front of the seat assembly is rounded to work with the Tornado tank as the stock GSXR tank is straight across the back.
If you were to put this on a chassis with a stock GSXR tank you would have a half moon shaped gap in the front of the seat pan area.

Price

YT3P
Yoshimura Tornado GSXR 750 Upholstery pan

This is the fiberglass pan that fits onto the YT3 Tornado seat assembly. Use this pan to upholster for a finished look on your cool Tornado tail section.

Price

YT3M
Suzuki GSXR 750 Yoshimura superbike tail

This is a modified Yoshimura Tornado tail section. It is a shorter in the back and on the sides and works with the stock steel GSXR 750 fuel tank. The seat pan has been filled in for use with race foam. The tail light is filled in for track use but can easily be cut open.

You will need to make a support bracket underneath the seat pan to support the rider's weight.

Seat foam

Price

YT4
Yoshimura Tornado GSXR 750 Race Fuel Tank

The shape of this tank is definitely cool! The top of the tank is slightly lower and the bottom a bit wider than the stock GSXR tank. It also comes with our race aluminum gas cap and a 3/8" NPT bung in the bottom of the tank for a Pingel race valve.

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

YT5
Suzuki GSXR 750 Yoshimura Tornado Front fender

This is the front fender that was used on the GSXR750 version of the Tornado. The 1200 version used a different front fender.

Price

Yoshimura parts for '86-'87 GSXR 750 and 1100

GSXR7YAD
Suzuki GSXR 750 Yoshimura air duct
These Yoshimura cool air intake ducts can be installed in the upper fairing of your GSXR750 or GSXR 1100 as shown in the picture below. You will have to cut the opening and fiberglass, epoxy or rivet the ducts in place. We also carry matching smoothbore duct, click here. The ducts are 1.75" OD.

Price

GSXR7YFC
Suzuki GSXR 750 Yoshimura frame / carb covers
Check out these cool covers with the Yosh logo on them. Pure unobtanium, until now!

Price

GSXR7YFL
Suzuki GSXR 750 Yoshimura fairing louvers
These louvered vents were designed by Yoshimura to improve hot air evacuation away from the motor at speed. These can be installed into stock fairings or replacement fairings (like our one-piece race upper) by cutting an opening in the desired spot and mounting these louvered fairing insert with pop rivets or windscreen screws, as shown below.

Price

GSXR7YOCD
Suzuki GSXR 750 Yoshimura oil cooler ducts
These ducts were used by Yoshimura at the beginning of the '88 season to install the wider curved oil coolers on the '87 bikes they were still using. You can see them attached to Doug Polen's bike in the pictures below.

To install these you first cut a slot in the side fairings so the ends of the curved oil cooler stick through, then install these ducts with pop rivets or windscreen screws.

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
YOSHIMURA TORNADO
YT1 YOSHIMURA TORNADO UPPER-STREET $345.80
YT2 YOSHIMURA TORNADO LOWER $172.90
YT3 YOSHIMURA TORNADO TAIL SECTION-SUPERBIKE $228.24
YT3P YOSHIMURA TORNADO SEAT PAN FOR UPHOLSTERY $48.41
YT3M YOSHIMURA "TORNADO" SUPERBIKE TAIL SECTION - MODIFIED $228.24
YT4 YOSHIMURA TORNADO RACE FUEL TANK $687.63
YT5 YOSHIMURA TORNADO 750 FRONT FENDER $82.99
GSXR7YAD SUZUKI GSXR 750 YOSHIMURA COLD AIR INTAKES $115.00
GSXR7YFC SUZUKI GSXR 750 YOSHIMURA FRAME / CARB COVERS $82.99
GSXR7YFL SUZUKI GSXR 750 YOSHIMURA FAIRING LOUVERS $115.00
GSXR7YOCD SUZUKI GSXR 750 YOSHIMURA OIL COOLER DUCTS $82.99

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices