88-91 Yoshimura F1

This is one of the most beautifully designed sculpted fairings made for the GSXR. The upper has sharp louvers in the sides to ventilate radiator heat out of the bike. Intake ducts route air through internal ducting back to the air box.

Our one piece lower affixes easily and has several vents in it that pull hot air out of the engine compartment.

Our distinctive Yosh F1 race seat has been titled "the big butt seat" by some because of its appearance. It is designed in a fashion that reattaches the air behind the motorcycle, which reduces drag. For underneath the tail section, we make an anti-draft shield that bonds under the subframe and controls the turbulent air swirling around the rear tire. The whole assembly was used by Yoshimura at the end of the 91' season and on some of their Formula 1 bikes. Where this setup has really shined however, is in the Unlimited Flying Object arena. Several UFO bikes used this assembly. Sims & Rohm took theirs to 208 mph!

If you want trick, this is the gear for you and your two wheeled companion. You can't get this stuff anywhere else!

Looking for some Suzuki GSXR or Hayabusa fairings? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!