TLR1000 1998-03 PRO STOCK CHASSIS

All Prices are listed at the bottom of the page

TL1000R 1998-03
Pro Stock drag bike bodywork

This is definitely the hottest and most beautiful best performing bodywork available for a pro stock chassis. Air-Tech designer, Kent Riches, did a fantastic job of designing this bodywork for the pro stock Suzuki racers. This body work has been used by Pro Stock Champions Angel Savoy, Sean Gann, Steve Johnson, Geno Scalli, Karen Stoffer and pretty much all of the front running NHRA Pro Stock racers. If you’re not using this bodywork, chances are your not even qualifying. Step up to the big leagues and get your TL bodywork today

 

TLRDB1
Pro stock fairing

Kent Riches, the owner of Airtech pulled out all the stops when he designed this fairing, This design optimizes air intake through the front of the bike for the highest air box pressure and volume, while maintaining and maximizing air flow around the bike for top mile an hour records. The fairing includes a dash panel that mounts inside the front fairing assembly. This dash piece seals off the top of the fairing to avoid a high-pressure bleed off around the forks as well as maximizes air that is forced into the air box assembly. This fairing only fits a pro stock chassis. This design clears a spider pipe and uses a stock TLR windscreen.

TLRDB2
Body

This is our TLR Pro Stock body design. This body assembly incorporates all of Kent Riches year’s worth of knowledge and design features into it. It may look fairly simple but there are a lot of tricks to it. Take the gas tank area for instance; the dash panel areas have been raised to allow more airflow through the front of the bike and over the top of the valve cover to maximize air into the air box area. The seat pan area has a removable two-step seat so that you can adjust the rider’s pocket. The pan keeps you locked in up front for a track that’s hooking up, or take the pan out and move your weight back in the pocket for a loose track. Other features are, full skirts on the sides, rear fenderette for 10” tire width, and taillight assembly all make this definitely one the most sleek and beautiful pro stock bodies on the market. This body only fits on a drag race chassis.

 

TLRDB3
Belly pan

This is the lower front belly pan assembly that incorporates the front ramp that ties in with the air box assembly. Kent Riches should have patented this design years ago ‘cuz you cant run up front on a pro stocker without one of these babies! This is a seamless design that incorporates the lower front belli pan with some aerofoils that fair and tie together the leading edge of the fairing. This pan most importantly incorporates a ramp that directs air up and over the valve cover and into the air box. Basically this piece scoops all the air it can and crams it into the air box without letting any air escape around the motor and bike. More air = more HP.

 

TLRDB4
Front fender

This piece is a narrowed fender that fits a narrow drag fork and skinny drag racing front tire. This fender works on an inverted front fork as well as PMFR and Kosman style conventional forks.

TLRDB5
Seat pan

This is the two-step seat pan that mounts in the rider’s section of the body. This piece is normally sold in fiberglass but it is also available in carbon fiber. The picture shows the seat pan made in optional carbon fiber. We have found in our experience and testing that this seat pocket and second step height is the optimum for launch and high gear position.


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
TLR1000 1998-03 PRO STOCK CHASSIS
TLRDB1
FAIRING
$2,000.00
TLRDB2
BODY
$2,000.00
TLRDB3
BELLI PAN-FRONT
$228.24
TLRDB3M
BELLI PAN-FRONT-(PMFR)
$228.24
TLRDB4
FENDER-FRONT
$89.90
TLRDB5
SEAT PAN
$153.69

To order call 760-598-3366 NOW!

Looking for some Suzuki GSXR or Hayabusa fairings? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!