SUZUKI RF900 1994-97 fairing, fairings, tail, seat, front fender, rear hugger, upper, lower, bellypan, fuel tank, undertail

All Prices are listed at the bottom of the page

	We know OEM bodywork isn't the most reasonably priced stuff in the world to purchase. And if you are in the market for an RF 600 or RF 900 fairing, you know exactly what we mean. So isn't it great Air-Tech carries replacement stuff that fits your RF? We offer a street upper with the headlight holes filled in for track use. Street-hounds don't despair; you can easily cut the same upper open to accept the stock headlight and turn signals. Our projector beam headlights can also be fitted if you want to go for a custom street bike look. Also we sell left and right lower fairing panels, the front fender, and even a fuel tank. So don't let the high price of factory bodywork stop you from replacing damaged parts, paying a visit to the local racetrack, or customizing the daylights out of your bike. Air-Tech makes things easy for you. Go ahead, use our bodywork. You’ll be happy you did.
	RF1C Competition upper What we have here is a race upper fairing for your RF900. Basically we’ve taken the stock upper fairing, drilled in the headlight holes and the turn signal holes for race purposes. This is a great piece for track day guys who would like to save their expensive upper and headlight assembly from any damage. A custom street bike guy might like this because they can cut their own headlight shape into the front of the fairing. Replace your crash damaged bodywork with our lightweight inexpensive fiberglass body panel today! Price
	RF2 Right lower This fairing assembly is all of the right panels molded as a one-piece unit. The right fairing lower and the vented access door has been molded together for a clean one-piece design. Replace your expensive and rare body panels with our lightweight fiberglass pieces. Price
	RF3 Left lower This is our one-piece left hand fairing assembly for your RF900. This is the lower assembly and the vented access doors all molded as a clean one-piece unit. Price
	RF4 Front fender This is a direct replacement fender for the RF900. Price
	RF6 Super sport race tail This cool race tail section is the right and left seat sides, the solo seat cowl, and the tail light area all molded as a one piece unit. This one-piece design hides the passenger part of your long upholstery to make it look like a one-piece race tail. Simply slide your upholstery into this fiberglass tail section assembly and then take that assembly and install it onto your chassis. To remove this off of your bike simply pop the seat locks and remove the whole rear clip off of the chassis in one easy step. This can easily be used on a street bike if you cut the taillight hole open. Price
	RF7 Fuel tank Our lightweight fuel tank improves the performance of your bike. You see, if you weigh your stock tank you’ll find that it weights about 13 pounds, our lightweight fiberglass tank only weighs about 4 pounds! This is a substantial weight reduction off of the top of your motorcycle. You will defiantly notice-handling improvements, as the bike will flick easier from right to left around corners. This tank comes with one of our cool racing gas caps and also comes with a 3/8 NPT fuel bung in the bottom of the tank for use with a single racing fuel valve. Increase the handling performance of your bike with our lightweight fuel tank today! Price Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent. In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

Please note these very important items!

We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #	Description	Retail
SUZUKI RF900 '94-'97
RF1C	SUZUKI RF900 '94-'97 UPPER FAIRING - COMPETITION	$131.41
RF2	SUZUKI RF900 '94-'97 LOWER FAIRING - RIGHT	$207.02
RF3	SUZUKI RF900 '94-'97 LOWER FAIRING - LEFT	$207.02
RF4	SUZUKI RF900 '94-'97 FENDER - FRONT	$62.25
RF6	SUZUKI RF900 '94-'97 TAIL SECTION - SUPERSPORT	$206.64
RF7	SUZUKI RF900 '94-'97 FUEL TANK	$686.95

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices

Looking for some Suzuki GSXR or Hayabusa fairings? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!