GSXR 750 '86-'87

All Prices are listed at the bottom of the page

Just call us the GSXR Fairings Warehouse. We've got everything you could possibly want for the first modern racer replica sport bike, the classic GSXR 750.

Can you say GSXR 750 fairings? We have a street upper with the headlight hole cut open or a competition upper with the left and right center sides molded onto it to form a one piece race fairing. There are also left and right sides of several types to choose from:
One style has the stock appearance; the other has three louvers that evacuate more air out of the radiator, which makes the bike run cooler.

The belly pan/lower fairing is a one-piece unit that is a breeze to install compared to the multi-piece stock setup.

We have a few GSXR 750 tail sections to offer. One tail that incorporates the left and right side pieces, the tail light frame, solo seat cowl and license plate area in one seamless piece. This allows you to attach the seat and tail section in one swoop using the stock seat locks and the two 6mm fairing screws by the foot pegs. We also have the Limited Edition one-piece race seat. But wait, there's more! We make a solo seat cowl, a front number plate, cool air ducts to route cool air to the carburetor area, drag bike bodywork, a fuel tank, and even more. Really, there's no reason not to upgrade your bike, lighten it up, replace damaged bodywork, or just plain old customize the Bejesus out of it. Airtech can help make your bike's wildest dreams become a reality.

 

 

 

 

 

 

 

 

 

 

 

 

GSXR71
Suzuki GSXR 750 Street upper fairing

The turn signal holes have been filled in. This is a direct replacement fairing. Simply drill the mounting holes and mount onto your chassis.

Please note: this fairing mounts to the mid fairings with 2 bolts on each side.

Price

GSXR71C
Suzuki GSXR 750 upper fairing - competition

This is the race version of our GSXR71 upper fairing. The headlight opening has been filled in and the sharp edges around the opening were blended in for a softer more aerodynamic shape. Combine with stock mids or the 3-vent racing mids below.

Price

GSXR71P
Suzuki GSXR 750 One-piece upper

This is a one piece race upper fairing for the GSXR. It is the upper fairing and the right and left side panels molded as a one-piece unit. The headlight holes and turn signal holes have been filled in for race use. Simply drill the mounting holes and mount it onto your chassis for a cool one-piece race look.

Works with stock bellypan or our one-piece GSXR76 bellypan (see below).

Price

GSXR72
Suzuki GSXR 750 Right Mid

This is a direct replacement panel for the right mid side of your GSXR.

Price

GSXR73
Suzuki GSXR 750 Left Mid

This is a direct replacement panel for the GSXR left side mid panel.

Price

GSXR74
Suzuki GSXR 750 Right vented mid

This is a right side vented racing panel for your GSXR.

Price

GSXR75
Suzuki GSXR 750 Left vented mid

This a vented racing panel for the left side of your GSXR.

Price

 

GSXR76
Suzuki GSXR 750 Lower belly

This is the lower belly pan for your GSXR. This is the right and left side and the T section behind the tire all molded as a one-piece unit. This lightweight fiberglass piece replaces your crash damaged bodywork.

Price

GSXR77S
Suzuki GSXR 750 Street tail

This is a one-piece race tail for the guys who want to have a passenger provision. This is the right and left seat sides and the right and left tail section all molded as a one-piece unit. This also uses your stock upholstery, and is a cool direct replacement for your crash damaged bodywork.

Price

GSXR77
Suzuki GSXR 750 Super sport race tail

This is a cool one-piece race tail for your GSXR. This is the right and left seat sides, the right and left tail section, and the solo seat cowl tail light area all molded as a one-piece unit. This piece hides the passenger provision of your long upholstery. Simply slide your long upholstery into this tail section and then take that assembly and take that assembly mount onto the chassis. To remove this off of the bike simply pop the seat locks and take the whole rear assembly off of the bike in one easy step.

Price

GSXR77L
Suzuki GSXR 750 LTD Tail

This is a direct replacement of the Limited Edition tail section available for the GSXR750.

Price

GSXR77TLB
Suzuki GSXR 750 Tail light bracket

This bracket bonds to the inside any of our one piece race tails so that you can mount the tail light into the tail section for street use. Simply cut the taillight hole on your race tail, position the tail light assembly into the back of the tail section, and glue this bracket into the tail section to support your taillight.

Price

YT3M
Suzuki GSXR 750 Yoshimura superbike tail

This is a modified Yoshimura Tornado tail section. It is a shorter in the back and on the sides and works with the stock steel GSXR 750 fuel tank. The seat pan has been filled in for use with race foam. The tail light is filled in for track use but can easily be cut open.

You will need to make a support bracket underneath the seat pan to support the rider's weight.

Seat foam

Price

MORI1M
Suzuki GSXR 750 Moriwaki tail section

This is a modified Moriwaki tail section to suit the first gen GSXR750. The seat pan is a little longer, the back section a little shorter and the number plates a little smaller than the original Moriwaki seat. The back of the tail is scribed for a 86-87 GSXR750 taillight, and a taillight bracket is available below.

You will need to make a support bracket underneath the seat pan to raise the tail section off the seat rails and support the rider's weight.

Seat foam

Price

MORI1MTLB
Suzuki GSXR 750 Moriwaki tail light bracket

This is the taillight bracket to install a '86-87 GSXR750 taillight into the MORI1M tail section. Simply drill the holes in the bracket, screw the taillight to it and install the assembly with epoxy, bondo or silicone caulking.

Price

GSXR78
Suzuki GSXR 750 Solo seat cowl

This is a direct replacement cowling for your GSXR. Attach this to the rear part of your upholstery.

Price

2GSXR77
Suzuki GSXR 750 Rear fender

This is a later model ('88 and up) rear fender. It will fit the '86-'87 GSXR 750 but you will need to drill different mounting holes.

Price

GSXR711
Suzuki GSXR 750 Rear fender
This hugger is a brand new Airtech design for the GSXR750. Fit it to modified street & race bikes to keep the rear shock, motor and carbs clean. Works with both 17" wheel (up to 190 tire*) or a standard 18" wheel.

This rear fender fits the standard GSXR750 swingarm and is easily installed with a few rivet nuts.

* Some trimming may be required for chain/tire clearance depending on wheel/tire/chain combo - ask your sales rep for details.

Price

AT26M
Suzuki GSXR 750 Rear fender
This hugger is a brand new Airtech design for aftermarket overbraced 1st and 2nd gen GSXR750 swingarms like SPF where the brace runs parallel to the arm.

Fit it to modified street & race bikes to keep the rear shock, motor and carbs clean. 17" wheel only (tight on 18" wheel depending on brace).

Inside width 9"
Outside width 11.75"
Fender length 13"
Depth 6.5"

Price

GSXR79
Suzuki GSXR 750 Number plate
This is a cool piece for racing, track days or a custom headlight install. It covers up the stock headlight opening.

Price

GSXR712
Yoshimura GSXR 750 Number plate
This is a cool, larger Yosh number plate for racing, track days or a custom headlight install. It covers up the stock headlight opening and comes up on the lower edge of the windscreen.

Easily installed with windscreen screws or dzus fasteners..

11"x14" so legal number plate size for most organizations (usual requirement 10"x12").

Price

Shown here on a GSXR71 street fairing, sold separately.

GSXR7YAD
Suzuki GSXR 750 Yoshimura air duct
These Yoshimura cool air intake ducts can be installed in the upper fairing of your GSXR750 or GSXR 1100 as shown in the picture below. You will have to cut the opening and fiberglass, epoxy or rivet the ducts in place. We also carry matching smoothbore duct, click here. The ducts are 1.75" OD.

Price

GSXR7YFC
Suzuki GSXR 750 Yoshimura frame / carb covers
Check out these cool covers with the Yosh logo on them. Pure unobtanium, until now!

Price

GSXR7YFL
Suzuki GSXR 750 Yoshimura fairing louvers
These louvered vents were designed by Yoshimura to improve hot air evacuation away from the motor at speed. These can be installed into stock fairings or replacement fairings (like our one-piece race upper) by cutting an opening in the desired spot and mounting these louvered fairing insert with pop rivets or windscreen screws, as shown below.

Price

GSXR7YOCD
Suzuki GSXR 750 Yoshimura oil cooler ducts
These ducts were used by Yoshimura at the beginning of the '88 season to install the wider curved oil coolers on the '87 bikes they were still using. You can see them attached to Doug Polen's bike in the pictures below.

To install these you first cut a slot in the side fairings so the ends of the curved oil cooler stick through, then install these ducts with pop rivets or windscreen screws.

Price

GSXRFT
Suzuki GSXR 750 Fuel tank

This is an endurance style fuel tank for your GSXR. The bottom has been filled in where the airbox used to go to enlarge the fuel capacity. The top basically has the same shape as the stock 86 tank but was modified for dual dry break mounts. It now comes with one of our racing caps on the top and a 3/8" NPT bung in the bottom of the tank for use with a Pingel race valve.

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

UBBM2
Suzuki GSXR 750 Universal battery box

This battery box fits perfectly between the subframe* or can be flipped around and put underneath the tank where the airbox used to be. Great for custom builds or track bike!

* requires removal of stock battery box and relocation of electrical components. We know, duh...

Price

 

GSXR7RS
Suzuki GSXR 750 CNC Rearsets

Leave it up to Airtech to supply you with cool parts you can't get anywhere else in the world! These race tested CNC rearsets are of the highest quality and will improve ground clearance, grip and shift action of your slabside GSXR750 or GSXR1100. Perfect for racing, track bike or hot rod street bike.

Rearset kit complete with:
- Thick, one-piece CNC rearset plates
- Grippy, knurled footpegs with Teflon end plug
- CNC brake and shift evers on dual bearings – smooth action
- Rubber tipped levers
- Frame mounting bolts and all other hardware, heim joints and shift rod
- Uses OEM master cylinder and shift link
- Regular or GP shift pattern

Please note:
These rearsets do not have the lower mounting points for OEM bodywork. You can make simple brackets and attach them to the back of the rearsets like Yoshimura used to do.
There is no brake light switch provision. You will need a switched banjo bolt to retain that function, available below, part# SWITCH4.

Price

SWITCH4
Brake light switch
M10x1.25
Fits most Japanese bikes. Replace original banjo bolt with this switched one to retain brake light switch function. Coarse thread 1.25 pitch.

Price

 

YOSHIMURA XR51 BODYWORK

A limited run of seven XR51s was hand built by pops Yoshimura, it does not get much more exclusive than that! We've got molds for the race upper fairing and lower belly pan.

They can be mounted on the early GSXR750 as shown here, you will have to make or modify your own fairing brackets.

YXR511
Yoshimura XR51 Upper fairing
This is the Yoshimura XR51 race upper. Works only with the XR5112 lower belly. This upper fairing can also be used by itself for endurance racing.

Price

YXR512
Yoshimura XR51 Lower fairing
This is the lower belly pan that fits the YXR511 Yoshimura XR51 upper fairing.

Price

 

XR41 HB REPLICA

We've figured out a parts combo you can use to build an XR41 replica out of a 1st gen GSXR750. You will have to make or modify your own fairing brackets.

The original XR41 shown here on the left...

... and this is the replica.

You use a Hammer half fairing and cut the lower flange off. The Hammer upper will now mate up with a set of '85 (euro/Canadian) GSXR lower fairings. A little more trimming at the back edge to even them up.

 

The bottom fairings may interfere with the exhaust headers so you may have to trim around it or do a bit of glass work in that area.

HAMMER
Hammer half fairing

Price

CGSXR74
Canadian GSXR750 lower fairing - right

Price

 

CGSXR75
Canadian GSXR750 lower fairing - left

Price

 

MORI1M
Suzuki GSXR 750 Moriwaki tail section

This is a modified Moriwaki tail section to suit the first gen GSXR750. The seat pan is a little longer, the back section a little shorter and the number plates a little smaller than the original Moriwaki seat. The back of the tail is scribed for a 86-87 GSXR750 taillight, and a taillight bracket is available below.

You will need to make a support bracket underneath the seat pan to raise the tail section off the seat rails and support the rider's weight.

Seat foam

Price

YOSHIMURA TORNADO BODYWORK

 

YT1
Suzuki GSXR 750 Yoshimura Tornado Upper
This is the Yoshimura Tornado style bodywork for the GSXR 750. Works only with the YT2 lower belly.

Takes a special windscreen & headlight cover and requires bracket fabrication. It does not use the stock GSXR headlight (we've been told CiBie makes a light that fits).

Price

 

YT2
Suzuki GSXR 750 Yoshimura Tornado Lower
This is the lower belly pan that fits the YT1 Yoshimura Tornado upper fairing.

Price

 

YT3
Suzuki GSXR 750 Yoshimura Tornado Tail section

This is a real cool designed tail section for the first generation of GSXR chassis. This will not work with a stock GSXR gas tank, because the front of the seat assembly is rounded to work with the Tornado tank as the stock GSXR tank is straight across the back.
If you were to put this on a chassis with a stock GSXR tank you would have a half moon shaped gap in the front of the seat pan area.

Price

YT3P
Suzuki GSXR 750 Yoshimura Tornado Tail Upholstery pan

This is the fiberglass pan that fits onto the YT3 Tornado seat assembly. Use this pan to upholster for a finished look on your cool Tornado tail section.

Price

YT3M
Suzuki GSXR 750 Yoshimura superbike tail

This is a modified Yoshimura Tornado tail section. It is a shorter in the back and on the sides and works with the stock steel GSXR 750 fuel tank. If you want to use this seat with the Yosh Tornado tank below you will have to trim the seat pan area back to suit.

The seat pan has been filled in for use with race foam. The tail light is filled in for track use but can easily be cut open.

You will need to make a support bracket underneath the seat pan to support the rider's weight.

Seat foam

Price

YT4
Suzuki GSXR 750 Yoshimura Tornado Race Fuel Tank

The shape of this tank is definitely cool! The top of the tank is slightly lower and the bottom a bit wider than the stock GSXR tank. It also comes with our race aluminum gas cap and a 3/8" NPT bung in the bottom of the tank for a Pingle race valve.

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

YT5
Suzuki GSXR 750 Yoshimura Tornado Front fender

This is the front fender that was used on the GSXR750 version of the Tornado. The 1200 version used a different front fender.

Price

DRAGBIKE BODYWORK

2PGSXR1
Suzuki GSXR 750 Stretched Drag Bike Tail

What we have here folks is a drag bike tail for the first generation GSXR' s. Basically this is the right and left seat sides and frame covers and the solo seat cowl all molded as a one-piece unit. This tail section has been stretched 5" longer than the stock GSXR tail section. Since these bikes work really well on a 4-6" stretch this 5" over tail section right about where it looks really nice. Simple remove the stock bodywork off your bike, bolt this baby on, and your ready to go.

Price

2PGSXR2
Suzuki GSXR 750 Drag Bike Body

This is our +5 drag race tail section and a gas tank shell all molded as a one-piece unit to fit on to a production 1986-87 GSXR750 or 1986-88 GSXR1100 chassis. This is a really cool body for that old school small tire GSXR drag bike project.

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
SUZUKI GSXR 750 '86-'87
GSXR71 SUZUKI GSXR 750 UPPER FAIRING - STREET $127.62
GSXR71C SUZUKI GSXR 750 UPPER FAIRING - COMPETITION $127.62
GSXR71P SUZUKI GSXR 750 UPPER FAIRING - COMPETITION WITH MIDS $202.34
GSXR72 SUZUKI GSXR 750 CENTER SIDE FAIRING - RIGHT $82.99
GSXR73 SUZUKI GSXR 750 CENTER SIDE FAIRING - LEFT $82.99
GSXR74 SUZUKI GSXR 750 CENTER SIDE FAIRING - VENTED RIGHT $82.99
GSXR75 SUZUKI GSXR 750 CENTER SIDE FAIRING - VENTED LEFT $82.99
GSXR76 SUZUKI GSXR 750 LOWER FAIRING - ONE PIECE $186.74
GSXR77 SUZUKI GSXR 750 TAIL SECTION - SUPERSPORT $204.44
GSXR77S SUZUKI GSXR 750 TAIL SECTION - OEM ONE PIECE $204.44
GSXR77L SUZUKI GSXR 750 TAIL SECTION - LIMITED EDITION $204.44
GSXR77TLB SUZUKI GSXR 750 TAIL LIGHT BRACKET $34.58
YT3M YOSHIMURA "TORNADO" SUPERBIKE TAIL SECTION - MODIFIED $228.24
MORI1M MORIWAKI TAIL SECTION - MODIFIED $145.23
MORI1MTLB MORIWAKI - 86/87 GSXR750 TAILLIGHT BRACKET $33.07
GSXR78 SUZUKI GSXR 750 SOLO SEAT COWL $62.25
2GSXR77 SUZUKI GSXR 750 FENDER - REAR SWING ARM $82.99
GSXR79 SUZUKI GSXR 750 NUMBER PLATE $35.00
GSXR711 SUZUKI GSXR 750 FENDER - REAR SWING ARM $82.99
GSXR712 SUZUKI GSXR 750 FENDER - YOSHIMURA NUMBER PLATE $62.25
AT26M SUZUKI GSXR 750 FENDER - REAR SWING ARM OVER BRACED $82.99
GSXR7YAD SUZUKI GSXR 750 YOSHIMURA COLD AIR INTAKES $115.00
GSXR7YFC SUZUKI GSXR 750 YOSHIMURA FRAME / CARB COVERS $82.99
GSXR7YFL SUZUKI GSXR 750 YOSHIMURA FAIRING LOUVERS $115.00
GSXR7YOCD SUZUKI GSXR 750 YOSHIMURA OIL COOLER DUCTS $82.99
GSXRFT SUZUKI GSXR 750 FUEL TANK $674.35
UBBM2 SUZUKI GSXR 1100 UNIVERSAL BATTERY BOX MEDIUM $82.99
GSXR7RS SUZUKI GSXR 750 CNC REARSETS $495.00
SWITCH4 BRAKE LIGHT SWITCH M10X1.25 $24.95
YOSHIMURA XR51 BODYWORK
YXR511 YOSHIMURA XR51 UPPER FAIRING - RACE $345.80
YXR512 YOSHIMURA XR51 LOWER FAIRING $172.90
HB XR41 REPLICA
HAMMER HAMMER HALF FAIRING $172.90
CGSXR74 SUZUKI GSXR 750 LOWER FAIRING - RIGHT $103.75
CGSXR75 SUZUKI GSXR 750 LOWER FAIRING - VENTED LEFT $103.75
MORI1M MORIWAKI TAIL SECTION - MODIFIED $145.23
YOSHIMURA TORNADO WSB BODYWORK
YT1 YOSHIMURA "TORNADO" UPPER FAIRING - STREET $345.80
YT2 YOSHIMURA "TORNADO" LOWER FAIRING $172.90
YT3 YOSHIMURA "TORNADO" TAIL SECTION - SUPERBIKE $228.24
YT3P YOSHIMURA "TORNADO" SEAT PAN FOR UPHOLSTERY $48.41
YT3M YOSHIMURA "TORNADO" SUPERBIKE TAIL SECTION - MODIFIED $228.24
YT4 YOSHIMURA TORNADO RACE FUEL TANK $687.63
YT5 YOSHIMURA TORNADO 750 FRONT FENDER $82.99
GSXR 750 DRAGBIKE BODYWORK
2PGSXR1 SUZUKI GSXR 750 STRETCHED DRAGBIKE TAIL SECTION $228.24
2PGSXR2 SUZUKI GSXR 750 DRAGBIKE BODY $414.17

Looking for some Suzuki GSXR bodywork or a Hayabusa fairing? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices