| 
|
Pictured
with its American counterparts is our ravishing Canadian vix--
er, version of the Suzuki GSXR 750 bodywork.
The Canadian/european 1st generation GSXR750 differs from the
American version in several ways. To begin with, there is a
small air intake duct on each center panel in front of the radiator.
Three cool looking exhaust vents are cut into the back of both
center side pieces. The upper fairing is slightly wider than
the American version and attaches to the center panels with
three bolts rather than two. The return under the headlight
is also extended and uses only one bolt to mount rather than
two like the US unit.
So,
Airtech has a stock upper, right and left center sides and a
two piece lower. Save some weight over the stock pieces and
make your bike look mega-trick. Call us.
Need a seat? Not
only do we offer the a one-piece tail section that replaces
the stock three-piece, we also offer it with a solo seat cowl
molded into it for that race look. How about an '86 GSXR Limited
edition race seat? No problem, we've got what you need! |
| 
|
 CGSXR71
Suzuki GSXR 750 Street upper fairing
This is a replacement fairing. Simply drill the mounting holes
and mount onto your bike. The turn signal holes are already cut
out.
Please note: this fairing
mounts to the mid fairings with 3 bolts on each side.
Price |
| 
|
 CGSXR72
Suzuki GSXR 750 Center side / mid fairing - right
This is a direct replacement panel for the right mid side of your
GSXR.
Price |
| 
|
 CGSXR73
Suzuki GSXR 750 Center side / mid fairing - left
This is a direct replacement panel for the GSXR left side mid
panel.
Price |
| 
|
 CGSXR74
Suzuki GSXR 750 Lower fairing - right
This is a right side lower fairing for your GSXR.
Price |
 |
 CGSXR75
Suzuki GSXR 750 Lower fairing - left
This is a left side lower fairing for your GSXR.
Price
|
 |
 GSXR77S
Suzuki GSXR 750 Street tail
This is a one-piece race tail for the guys who want to have a
passenger provision. This is the right and left seat sides and
the right and left tail section all molded as a one-piece unit.
This also uses your stock upholstery, and is a cool direct replacement
for your crash damaged bodywork.
Price |
 |
GSXR77
Suzuki GSXR 750 Supersport race tail
This is a cool one-piece race tail for your GSXR. This is the
right and left seat sides, the right and left tail section, and
the solo seat cowl tail light area all molded as a one-piece unit.
This piece hides the passenger provision of your long upholstery.
Simply slide your long upholstery into this tail section and then
take that assembly and take that assembly mount onto the chassis.
To remove this off of the bike simply pop the seat locks and take
the whole rear assembly off of the bike in one easy step.
Price |
 |
GSXR77L
Suzuki GSXR 750 LTD Tail
This is a direct replacement of the Limited Edition tail section
available for the GSXR750.
Price |
 |
 GSXR77TLB
Suzuki GSXR 750 Tail light bracket
This bracket bonds to the inside any of our one piece race tails
so that you can mount the tail light into the tail section for
street use. Simply cut the taillight hole on your race tail, position
the tail light assembly into the back of the tail section, and
glue this bracket into the tail section to support your taillight.
Price |
 |
 GSXR78
Suzuki GSXR 750 Solo seat cowl
This is a direct replacement cowling for your GSXR. Attach this
to the rear part of your upholstery.
Price |
 |
 2GSXR77
Suzuki GSXR 750 Rear fender
This is a later model ('88 and up) rear fender. It will fit the
'86-'87 GSXR 750 but you will need to drill different mounting
holes.
Price
|
 |
GSXR79
Suzuki GSXR 750 Number plate
This is a cool piece for track days or a custom headlight
install. It covers up the stock headlight opening.
Price |
 |
 GSXRFT
Suzuki GSXR 750 Fuel tank
This is an endurance style fuel tank for you GSXR. This has a
slightly larger capacity with provisions for dual dry brake mounts
on the top. You can save seven to eight pounds off the top of
your bike with our lightweight fuel tank. It comes with one of
our racing caps on the top and a 3/8" NPT bung in the bottom
of the tank for use with a Pingel race valve.
Price
Please note! This gas tank
is not recommended for street use, this is a fiberglass gas tank
that will not dent. In the event of a crash, the gas tank
may rupture and spill fuel possibly catching your motorcycle on
fire. This gas tank is recommended for racing purposes, with racing
fuel only! Read more... |
| 
|
A limited run of seven XR51s was
hand built by pops Yoshimura, it does not get much more exclusive
than that! We've got molds for the race upper fairing and lower
belly pan. They can be mounted on the early GSXR750, you will have
to make or modify your own brackets. |
 |
 YXR511
Yoshimura XR51 Upper fairing
This is the Yoshimura XR51 race upper. Works only with the XR5112
lower belly. This upper fairing can also be used by itself for
endurance racing.
Price |
|
 YXR512
Yoshimura XR51 Lower fairing
This is the lower belly pan that fits the YXR511 Yoshimura
XR51 upper fairing.
Price
|
 |
|
 |
YT1
Suzuki GSXR 750 Yoshimura Tornado Upper
This is the Yoshimura Tornado style bodywork for the GSXR 750.
Works only with the YT2 lower belly.
Takes a special windscreen
& headlight cover and requires bracket fabrication. It
does not use the stock GSXR headlight (we've been told CiBie
makes a light that fits).
Price |
|
YT2
Suzuki GSXR 750 Yoshimura Tornado Lower
This is the lower belly pan that fits the YT1 Yoshimura
Tornado upper fairing.
Price
|
 |
 YT3
Suzuki GSXR 750 Yoshimura Tornado Tail section
This is a real cool designed tail section for the first generation
of GSXR chassis. This will not work with a stock GSXR
gas tank, because the front of the seat assembly is rounded
to work with the Tornado tank as the stock GSXR tank is straight
across the back.
If you were to put this on a chassis with a stock GSXR tank you
would have a half moon shaped gap in the front of the seat pan
area.
Price |
 |
YT3P
Suzuki GSXR 750 Yoshimura Tornado Tail Upholstery pan
This is the fiberglass pan that fits onto the YT3 Tornado seat
assembly. Use this pan to upholster for a finished look on your
cool Tornado tail section.
Price |
 |
YT4
Suzuki GSXR 750 Yoshimura Tornado Race Fuel Tank
The shape of this tank is definitely cool! The top of the tank
is slightly lower and the bottom a bit wider than the stock GSXR
tank. It also comes with our race aluminum gas cap and a 3/8"
NPT bung in the bottom of the tank for a Pingle
race valve.
Price
Please note! This gas tank
is not recommended for street use, this is a fiberglass gas tank
that will not dent. In the event of a crash, the gas tank
may rupture and spill fuel possibly catching your motorcycle on
fire. This gas tank is recommended for racing purposes, with racing
fuel only! Read more... |