GSXR 1100 '86-'88

All Prices are listed at the bottom of the page

Just call us the GSXR Fairings Warehouse. We've got everything you could possibly want for the first modern racer replica sport bike, the classic GSXR 1100.

Can you say GSXR 1100 fairings? We have a street upper with the headlight hole cut open or a competition upper with the left and right center sides molded onto it to form a one piece race fairing. There are also left and right sides of several types to choose from:
One style has the stock appearance; the other has three louvers that evacuate more air out of the radiator, which makes the bike run cooler.

The belly pan/lower fairing is a one-piece unit that is a breeze to install compared to the multi-piece stock setup.

We have a few GSXR 1100 tail sections to offer. One tail that incorporates the left and right side pieces, the tail light frame, solo seat cowl and license plate area in one seamless piece. This allows you to attach the seat and tail section in one swoop using the stock seat locks and the two 6mm fairing screws by the foot pegs. We also have the Limited Edition one-piece race seat. But wait, there's more! We make a solo seat cowl, a front number plate, cool air ducts to route cool air to the carburetor area, drag bike bodywork, a fuel tank, and even more. Really, there's no reason not to upgrade your bike, lighten it up, replace damaged bodywork, or just plain old customize the Bejesus out of it. Airtech can help make your bike's wildest dreams become a reality.

GSXR111
Suzuki GSXR 1100 Street upper fairing

The turn signal holes have been filled in. This is a direct replacement fairing. Simply drill the mounting holes and mount onto your chassis. Replace your crash damaged bodywork with our lightweight fiberglass piece.
This fairing is identical to the GSXR 750 fairing except it's 1/2" wider at the bottom (fork opening measures 13" vs 12.5" on the 750). Also fitted to the 750 LTD model.

Price

GSXR71P
Suzuki GSXR 1100 One-piece upper

This is a one piece race upper fairing for the GSXR. It is the upper fairing and the right and left side panels molded as a one-piece unit. The headlight holes and turn signal holes have been filled in for race use. Simply drill the mounting holes and mount it onto your chassis for a cool one-piece race look.

Works with stock bellypan or our one-piece GSXR76 bellypan (see below).

Price

GSXR72
Suzuki GSXR 1100 Right Mid

This is a direct replacement panel for the right mid side of your GSXR.

Price

GSXR73
Suzuki GSXR 1100 Left Mid

This is a direct replacement panel for the GSXR left side mid panel.

Price

GSXR74
Suzuki GSXR 1100 Right vented mid

This is a right side vented racing panel for your GSXR.

Price

GSXR75
Suzuki GSXR 1100 Left vented mid

This a vented racing panel for the left side of your GSXR.

Price

 

GSXR76
Suzuki GSXR 1100 Lower belly

This is the lower belly pan for your GSXR. This is the right and left side and the T section behind the tire all molded as a one-piece unit. This lightweight fiberglass piece replaces your crash damaged bodywork.

Price

GSXR77
Suzuki GSXR 1100 Super sport race tail

This is a cool one-piece race tail for your GSXR. This is the right and left seat sides, the right and left tail section, and the solo seat cowl tail light area all molded as a one-piece unit. This piece hides the passenger provision of your long upholstery. Simply slide your long upholstery into this tail section and then take that assembly and take that assembly mount onto the chassis. To remove this off of the bike simply pop the seat locks and take the whole rear assembly off of the bike in one easy step.

Price

GSXR77S
Suzuki GSXR 1100 Street tail

This is a one-piece race tail for the guys who want to have a passenger provision. This is the right and left seat sides and the right and left tail section all molded as a one-piece unit. This also uses your stock upholstery, and is a cool direct replacement for your crash damaged bodywork.

Price

GSXR77L
Suzuki GSXR 1100 LTD Tail

This is a direct replacement of the limited edition tail section available for the GSXR750.

Price

GSXR77TLB
Suzuki GSXR 1100 Tail light bracket

This bracket bonds to the inside any of our one piece race tails so that you can mount the tail light into the tail section for street use. Simply cut the taillight hole on your race tail, position the tail light assembly into the back of the tail section, and glue this bracket into the tail section to support your taillight.

Price

YT3M
Suzuki GSXR 1100 Yoshimura superbike tail

This is a modified Yoshimura Tornado tail section. It is a shorter in the back and on the sides and works with the stock steel GSXR 750 fuel tank. The seat pan has been filled in for use with race foam. The tail light is filled in for track use but can easily be cut open.

You will need to make a support bracket underneath the seat pan to support the rider's weight.

Seat foam

Price

MORI1M
Suzuki GSXR 750 Moriwaki tail section

This is a modified Moriwaki tail section to suit the first gen GSXR750. The seat pan is a little longer, the back section a little shorter and the number plates a little smaller than the original Moriwaki seat. The back of the tail is scribed for a 86-87 GSXR750 taillight, and a taillight bracket is available below.

You will need to make a support bracket underneath the seat pan to raise the tail section off the seat rails and support the rider's weight.

Seat foam

Price

MORI1MTLB
Suzuki GSXR 750 Moriwaki tail light bracket

This is the taillight bracket to install a '86-87 GSXR750 taillight into the MORI1M tail section. Simply drill the holes in the bracket, screw the taillight to it and install the assembly with epoxy, bondo or silicone caulking.

Price

GSXR7YFC
Suzuki GSXR 1100 Yoshimura frame / carb covers
Check out these cool covers with the Yosh logo on them. Pure unobtanium, until now!

Price

GSXR7YAD
Suzuki GSXR 1100 Yoshimura air duct
These Yoshimura cool air intake ducts can be installed in the upper fairing of your GSXR750 or GSXR 1100 as shown in the picture below. You will have to cut the opening and fiberglass, epoxy or rivet the ducts in place. We also carry matching smoothbore duct, click here. The ducts are 1.75" OD.

Price

GSXR78
Suzuki GSXR 1100 Solo seat cowl

This is a direct replacement cowling for your GSXR. Attach this to the rear part of your upholstery.

Price

GSXR79
Suzuki GSXR 1100 Number plate
This is a cool piece for track days or a custom headlight install. It covers up the stock headlight opening.

Price

2GSXR77
Suzuki GSXR 1100 Rear fender

This is a later model ('88 and up) rear fender. It will fit the '86-'88 GSXR 1100 but you will need to drill different mounting holes.

Price

GSXRFT
Suzuki GSXR 1100 Fuel tank

This is an endurance style fuel tank for your GSXR. The bottom has been filled in where the airbox used to go to enlarge the fuel capacity. The top basically has the same shape as the stock 86 tank but was modified for dual dry break mounts. It now comes with one of our racing caps on the top and a 3/8" NPT bung in the bottom of the tank for use with a Pingel race valve.

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

UBBM2
Suzuki GSXR 750 Universal battery box

This battery box fits perfectly between the subframe* or can be flipped around and put underneath the tank where the airbox used to be. Great for custom builds or track bike!

* requires removal of stock battery box and relocation of electrical components. We know, duh...

Price

YOSHIMURA XR51 BODYWORK

A limited run of seven XR51s was hand built by pops Yoshimura, it does not get much more exclusive than that! We've got molds for the race upper fairing and lower belly pan. They can be mounted on the early GSXR750, you will have to make or modify your own brackets.

YXR511
Yoshimura XR51 Upper fairing
This is the Yoshimura XR51 race upper. Works only with the XR5112 lower belly. This upper fairing can also be used by itself for endurance racing.

Price

YXR512
Yoshimura XR51 Lower fairing
This is the lower belly pan that fits the YXR511 Yoshimura XR51 upper fairing.

Price

 

YOSHIMURA WORLD SUPERBIKE BODYWORK
 

YT1
Suzuki GSXR 1100 Yoshimura Yoshimura Tornado Upper
This is the Yoshimura Tornado style bodywork for the GSXR 1100. Works only with the YT2 lower belly.

Takes a special windscreen and requires bracket fabrication. It does not use the stock GSXR headlight (we've been told CiBie makes a light that fits).

Price

 

YT2
Suzuki GSXR 1100 Yoshimura Yoshimura Tornado Lower
This is the lower belly pan that fits the YT1 Yoshimura Tornado upper fairing.

Price

 

YT3
Suzuki GSXR 1100 Yoshimura Tornado Tail section

This is a real cool designed tail section for the first generation of GSXR chassis. This will not work with a stock GSXR gas tank, because the front of the seat assembly is rounded to work with the Tornado tank as the stock GSXR tank is straight across the back.
If you were to put this on a chassis with a stock GSXR tank you would have a half moon shaped gap in the front of the seat pan area.

Price

YT3P
Suzuki GSXR 1100 Yoshimura Tornado Tail Upholstery pan

This is the fiberglass pan that fits onto the YT3 Tornado seat assembly. Use this pan to upholster for a finished look on your cool Tornado tail section.

Price

YT3M
Suzuki GSXR 1100 Yoshimura superbike tail

This is a modified Yoshimura Tornado tail section. It is a shorter in the back and on the sides and works with the stock steel GSXR 1100 fuel tank. If you want to use this seat with the Yosh Tornado tank below you will have to trim the seat pan area back to suit.

The seat pan has been filled in for use with race foam. The tail light is filled in for track use but can easily be cut open.

You will need to make a support bracket underneath the seat pan to support the rider's weight.

Seat foam

Price

YT4
Suzuki GSXR 1100 Yoshimura Tornado Race Fuel Tank

The shape of this tank is definitely cool! The top of the tank is slightly lower and the bottom a bit wider than the stock GSXR tank. It also comes with our race aluminum gas cap and a 3/8" NPT bung in the bottom of the tank for a Pingel race valve.

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

DRAGBIKE BODYWORK

2PGSXR1
Suzuki GSXR 1100 Stretched Drag Bike Tail

What we have here folks is a drag bike tail for the first generation GSXR' s. Basically this is the right and left seat sides and frame covers and the solo seat cowl all molded as a one-piece unit. This tail section has been stretched 5" longer than the stock GSXR tail section. Since these bikes work really well on a 4-6" stretch this 5" over tail section right about where it looks really nice. Simple remove the stock bodywork off your bike, bolt this baby on, and your ready to go.

Price

2PGSXR2
Suzuki GSXR 1100 Drag Bike Body

This is our +5 drag race tail section and a gas tank shell all molded as a one-piece unit to fit on to a production 1986-87 GSXR750 or 1986-88 GSXR1100 chassis. This is a really cool body for that old school small tire GSXR drag bike project.

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
SUZUKI GSXR 1100 '86-'88
GSXR111 SUZUKI GSXR 1100 UPPER FAIRING - STREET $127.62
GSXR71P SUZUKI GSXR 1100 UPPER FAIRING - COMPETITION WITH MIDS $202.34
GSXR72 SUZUKI GSXR 1100 CENTER SIDE FAIRING - RIGHT $82.99
GSXR73 SUZUKI GSXR 1100 CENTER SIDE FAIRING - LEFT $82.99
GSXR74 SUZUKI GSXR 1100 CENTER SIDE FAIRING - VENTED RIGHT $82.99
GSXR75 SUZUKI GSXR 1100 CENTER SIDE FAIRING - VENTED LEFT $82.99
GSXR76 SUZUKI GSXR 1100 LOWER FAIRING - ONE PIECE $186.74
GSXR77 SUZUKI GSXR 1100 TAIL SECTION - SUPERSPORT $204.44
GSXR77S SUZUKI GSXR 1100 TAIL SECTION - OEM ONE PIECE $204.44
GSXR77L SUZUKI GSXR 1100 TAIL SECTION - LIMITED EDITION $204.44
GSXR77TLB SUZUKI GSXR 1100 TAIL SECTION - LIMITED EDITION $34.58
YT3M YOSHIMURA "TORNADO" SUPERBIKE TAIL SECTION - MODIFIED $228.24
MORI1M MORIWAKI TAIL SECTION - MODIFIED $145.23
MORI1MTLB MORIWAKI - 86/87 GSXR750 TAILLIGHT BRACKET $33.07
GSXR78 SUZUKI GSXR 1100 SOLO SEAT COWL $62.25
GSXR79 SUZUKI GSXR 1100 NUMBER PLATE $20.76
2GSXR77 SUZUKI GSXR 1100 FENDER - REAR SWING ARM $82.99
GSXR7YFC SUZUKI GSXR 750 YOSHIMURA FRAME / CARB COVERS $82.99
GSXR7YAD SUZUKI GSXR 750 YOSHIMURA COLD AIR INTAKES $115.00
GSXRFT SUZUKI GSXR 1100 FUEL TANK $674.35
UBBM2 SUZUKI GSXR 750 UNIVERSAL BATTERY BOX MEDIUM $82.99
YOSHIMURA XR51 BODYWORK
YXR511 YOSHIMURA XR51 UPPER FAIRING - RACE $345.80
YXR512 YOSHIMURA XR51 LOWER FAIRING $172.90
YOSHIMURA WORLD SUPERBIKE BODYWORK
YT1 SUZUKI GSXR 1100 "TORNADO" UPPER FAIRING - STREET $345.80
YT2 SUZUKI GSXR 1100 "TORNADO" LOWER FAIRING $172.90
YT3 SUZUKI GSXR 1100 "TORNADO" TAIL SECTION - SUPERBIKE $228.24
YT3P SUZUKI GSXR 1100 "TORNADO" SEAT PAN FOR UPHOLSTERY $48.41
YT3M YOSHIMURA "TORNADO" SUPERBIKE TAIL SECTION - MODIFIED $228.24
YT4 SUZUKI GSXR 1100 "TORNADO" FUEL TANK $687.63
GSXR 1100 DRAGBIKE BODYWORK
2PGSXR1 SUZUKI GSXR 1100 STRETCHED DRAGBIKE TAIL SECTION $228.24
2PGSXR2 SUZUKI GSXR 1100 DRAGBIKE BODY $414.17

Looking for some Suzuki GSXR bodywork or a Hayabusa fairing? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices