MUZZY RAPTOR 1996-'03

All Prices are listed at the bottom of the page

 

Back in 1997 Kawasaki teamed up with Rob Muzzy of Muzzy Performance in order to create a superbike based off the already extremely potent ZX7R. The result was the Raptor, a hand-built machine of which 35 original examples were made at the Muzzy facility in Bend Oregon. Airtech has aquired the molds used on the Raptors from Muzzy, including the very distinctive front air duct so we may continue making the parts. Turn your ZX7R into a Raptor replica or replace your original fairings, call us today for a quote.

3ZX7RMR1
Raptor Street upper fairing
Street version of the upper fairing for the Muzzy Raptor.

Price

3ZX7RMR1C
Raptor Race Upper fairing
This is a competition version of the Raptor fairing without headlight openings for racing.

Price

3ZX7RMR2
Raptor lower fairing-Street
This is a supersport lower fairing that pairs with our upper fairing.

Price

 

(This piece only works with the 3ZX7RMR1C, or 3ZX7RMR1.)

3ZX7RMR2R
Raptor lower fairing-Race
This is a supersport lower fairing that pairs with our upper fairing. This is the race version for track use, we can install a dam in the rear for a small surcharge.

Price

(This piece only works with the 3ZX7RMR1C, or 3ZX7RMR1.)

3ZX7RMR3 Raptor Front Air Duct
This is the very distinctive front air duct assembly used on the Muzzy Raptors. The street version has the two indentions just behind the duct opening.

(Also available in the original carbon fiber)

Price

3ZX7RMR3R Raptor Front Air Duct Competition
This is the very distinctive front air duct assembly used on the Muzzy Raptors for the track.

(Also available in the original carbon fiber)

Price

3ZX7RMRS
Muzzy Raptor- radiator shroud
This radiator shroud is a cool piece that fits around the fork legs and helps direct air through the radiator instead of bleeding off over the top of it.

 

Price

3ZX7R4
Kawasaki ZX7R Supersport seat
This is a one-piece race tail for your Kawasaki ZX7R. We've basically molded the left and right seat sides, solo seat cowl, and tail light area as a one-piece unit. This tail is legal for most race organizations and really cool for custom street bikes. Street guys will cut the tail light hole and silicone in their tail light then mount it on their chassis for that race bike look. This is definitely the coolest tail section for the Kawasaki ZX7R out there. Get yours today!

Price

3ZX7R4SB
Kawasaki ZX7R Superbike seat
This is a one-piece race tail for your Kawasaki ZX7R. We've basically molded the left and right seat sides, solo seat cowl, and tail light area as a one-piece unit. It’s a super bike tail because the seat pan area is filled in and flat for use with close cell race padding, available here, instead of the stock upholstery. This is a race legal tail section for most racing organizations and is a cool tail section for custom street bikes. Get one today!

To support the rider weight you will need the under seat bracket that goes between the frame and the seat pan (3ZX7R4B).

Price

3ZX7R4B
Kawasaki ZX7R Support bracket
This bracket mounts onto the subframe to support the rider weight when using our superbike seat (3ZX7R4SB).

Price

3ZX7R5
Kawasaki ZX7R Front fender
Direct replacement for the Kawasaki ZX7R front fender. Just drill the mounting holes, take off your heavy plastic piece, and install our lightweight fiberglass fender. This fender is lighter than stock so your suspension reacts faster. This fiberglass fender is also available in carbon fiber. Ask one of our sales reps today.

Price

3ZX7R9
Kawasaki ZX7R Undertail
Remove all that stock heavy black plastic and lighten up the back of your bike. This piece can be attached inside of your stock tail section or one of our race tails (requires trimming) and cleans up the inside bottom of your bike. This is a must have to finish off the underside of your bike.

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
MUZZY RAPTOR ZX7R 1996-'03
3ZX7RMR1 RAPTOR ZX7R UPPER FAIRING - COMPETITION $401.11
3ZX7RMR1C RAPTOR ZX7R RACE UPPER FAIRING $401.11
3ZX7RMR3 RAPTOR ZX7R FRONT AIR DUCT ASSEMBLY $395.00
3ZX7RMR2 RAPTOR ZX7R STREET LOWER FAIRING $242.07
3ZX7RMR2R RAPTOR ZX7R RACE LOWER FAIRING $242.07
3ZX7RMR3R RAPTOR ZX7R FRONT AIR DUCT ASSEMBLY-RACE VERSION $395.00
3ZX7RMRS RAPTOR ZX7R RADIATOR SHROUD $110.00
3ZX7R4 KAWASAKI ZX7R TAIL SECTION - SUPERSPORT $197.60
3ZX7R4SB KAWASAKI ZX7R TAIL SECTION - SUPERBIKE $207.02
3ZX7R4B KAWASAKI ZX7R SUPPORT BRACKET FOR SUPERBIKE SEAT $48.41
3ZX7R5 KAWASAKI ZX7R FENDER - FRONT $82.99
3ZX7R9 KAWASAKI ZX7R UNDER SEAT ENCLOSURE $159.08


 

Looking for some Kawasaki ZX7R bodywork or ZX9R or ZX10 fairings? Have a little Ninja EX 250 or EX 500 in need of some fairings? How about a quarter fairing for your GPZ or ZRX? Or a cafe seat for a Kawasaki H2 or KZ 650? Kawasaki dragbike anyone? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

 

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices