EX500 1994-'08

All Prices are listed at the bottom of the page

So you need new skin for your new '94-'08 EX500? We've got just the thing for you, be you street-bound warrior or track-God. Two fine uppers are available. One is a street replacement fairing that features pre-cut opening for the stock headlight (fabrication required). The other is smooth all over and perfect for the track. The race upper can be used to create a more tricked out bike, perhaps with aftermarket turn signals and a projector beam headlight.

The chin spoiler below mounts easily with your stock brackets and will look great with either upper

We also offer a belly pan with oil containment for racers. We also have 2 seats available for the EX500. The OEM styled unit is the stock sides and the tail light area molded into a one-piece unit.

The other seat is our super sport seat and is like the OEM seat, but with a solo seat cowl molded into it. It's a cool seat for that race replica look. Whatever your need, AirTech has got you covered.

Now available! We just finished a full length lower for your EX500. This is by far the best looking long lower fairing out there! We put nice sharp style lines in it to match the lines of the upper and large ducts on the side to draw hot air out and away from the motor.

Tired of that ugly gap between upper and lower fairing? Get your full lower today!

 

2EX5001C
Kawasaki EX500 Competition upper
fairing
If your racing your little EX500 or need an upper fairing for a custom headlight cut our for your street bike this is the part you're looking for. Basically it's our EX500 Street fairing with the headlight holes and turn signal holes filled in. A must for racers or track day guys, but custom street guys like it because they can cut their own headlight configuration out. They can cut the standard headlight opening or cut two round holes or two cats' eyes or even a smiley face. This is the fairing that you need! Call one of our sales reps today!

Price

2EX5001S
Kawasaki EX500 Street upper fairing

This is street replacement fairing for your crash damaged EX500. Although this fairing is identical in exterior shape to the stock Kawasaki piece, we do not do the mounting tabs on the insides for the headlight. You'll need to fabricate your own brackets to mount the headlight if you are planning to use this on the street. It is not too difficult to do a pretty crafty guy can usually handle it in a few hours. You can save yourself a ton of money over the stock Kawasaki piece!

Price

EX5003
Kawasaki EX500 Bellypan
This is a direct replacement for the optional Kawasaki accessories EX500 belly pan. It uses the stock Kawasaki brackets to mount. Replace your crash damaged panel with our lightweight fiberglass unit.

Price

 

EX5003L
Kawasaki EX500 full lower fairing - Long

We just finished a full length lower for your EX500. This is by far the best looking long lower fairing out there! We put nice sharp style lines in it to match the lines of the upper and large ducts on the side to draw hot air out and away from the motor.

Tired of that ugly gap between upper and lower fairing? Get your full lower today!

Please note: This is a street lower and does not have oil containment.

Price

 

EX5003M
Kawasaki EX500 Belly pan with oil containment

If you are racing your EX500 you will need oil containment. All race organizations require it. This piece is race legal for most race organizations. Styled after the Kawasaki belly pan we have filled in the bottom around the exhaust pipes and dammed the rear up for oil containment. It uses the stock Kawasaki brackets.

Price

 

2EX5004
Kawasaki EX500 Super sport race tail

What we have here is our most popular EX500 piece. This race tail is the right and left seat sides, the tail light area, and the solo seat cowl all molded as a one-piece unit. Your stock long upholstery slides into this tail section and hides the passenger part of this seat. You then take this assembly and install it onto your chassis and latch the seat locks. To remove this tail section simply pop your "seat latches" and remove the whole assembly off the back of your bike. This tail is popular in race use and legal in most race organizations around the country. This is also real popular way to get a custom race look for your street bike. Get yours today!

Price

2EX5004S
Kawasaki EX500 Street tail

This one-piece unit replaces the busted up left and right seat sides on your EX 500. Lighter and a cleaner than stock!

Price

2EX5005
Kawasaki EX500 Under seat enclosure
Cut off or replace all of that black plastic crap that hangs below your tail section. Replace it with our smooth under seat enclosure. This piece fills in underneath your tail section for a smooth custom look. The license plate brackets are already molded onto this under seat enclosure. Some skill level, and hand tools are required to cut your stock black plastic and install this cool undertail. A real crafty guy can trick out the under side of his EX500 in an afternoon.

Price

2EX5006
Kawasaki EX500 Front fender

This is our lightweight replacement fender for the EX500. Simply drill the mounting holes and mount it onto your chassis.

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
KAWASAKI EX500 1994-'08
2EX5001C
KAWASAKI EX500 UPPER FAIRING - COMPETITION
$200.56
2EX5001S
KAWASAKI EX500 UPPER FAIRING - STREET (NO HEADLIGHT MOUNTS)
$200.56
EX5003
KAWASAKI EX500 LOWER FAIRING - FACTORY
$159.08
EX5003L KAWASAKI EX500 FULL LOWER FAIRING - LONG $199.95
EX5003M
KAWASAKI EX500 LOWER FAIRING- WITH OIL CONTAINMENT PAN
$172.90
2EX5004
KAWASAKI EX500 TAIL SECTION - SUPERSPORT RACE
$207.02
2EX5004S
KAWASAKI EX500 SEAT SIDES - STREET (ONE PIECE UNIT)
$207.02
2EX5005
KAWASAKI EX500 UNDER SEAT ENCLOSURE
$110.66
2EX5006
KAWASAKI EX500 FENDER - FRONT
$89.90

Looking for some Kawasaki ZX7R bodywork or ZX9R or ZX10 fairings? Have a little Ninja EX 250 or EX 500 in need of some fairings? How about a quarter fairing for your GPZ or ZRX? Or a cafe seat for a Kawasaki H2 or KZ 650? Kawasaki dragbike anyone? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices