EX500 1987-93, EX 500, fairing, fairings, tail, seat, front fender, rear hugger, upper, lower, bellypan, fuel tank, undertail, air box, air ducts, Ninja, EX 250, 500, ZX 600, ZX6, ZX7R, ZX9, ZX9R, ZX10, ZX11, ZX12, KZ 400, 550, 650, 750, 900, 1000, 1100, ZRX, 1200, H1, H2, H1R, H2R

All Prices are listed at the bottom of the page

	Consider yourself lucky if you are in the market for 88-93 EX500 fairings. Air TECH has several options to select from. If your bike is strictly a street-ridden machine, we have a street upper with headlight holes, turn signal notches, and mirror slots already in place. Along with the street lower fairing, this is perfect stuff to replace damaged bodywork on your precious Kawi. Those of you stricken with a case of the racing bug have two options. If you want your bike to serve duty on both track and street, we have a front number plate that sticks onto the inside of your stock upper. All-out racer-folk will want to opt for the competition version upper, which has headlight, signal, and mirror holes filled in. Youll look great aboard your EX cutting through the wind on the front straight with an Air TECH upper leading the way. Oh yes, we also have a one piece race seat available. Did we mention the weight savings you get with our bodywork? AirTECH is a diet program for bikes. Nuff said.
	EX5001 Kawasaki EX500 Street upper fairing Do you need some bodywork for your street bike? Is it busted or scratched up? Dont worry about it because we can help you out. What we have here is a replacement fairing for your EX500 street bike. This fairing is identical in exterior shape to the stock EX500 part. Although, we do not do the inside tabs to mount the headlight, but thats no problem because you actually dont need them to mount this fairing onto the bike. Our tech reps have been mounting this fairing onto an EX500 for over twelve years. They simply stick the headlight into the metal fairing bracket and then put the fairing on and mount at the mirrors bolts at the top and to the side mounts at the lower rear of the fairing. Its great! Since all supply of these old EX fairings have long dried up in the salvage yards and the stock Kawasaki piece is pretty expensive. Out street replacement fairing can save you a ton of money. Freshen up your EX500 with one of our fairings today! Price
	EX5001C Kawasaki EX500 Competition upper fairing If youre racing your EX500 or just looking for a fairing to do a custom headlight cut out for a street bike, this is the fairing for you. This fairing is identical in exterior shape to the EX500 fairing with the exception that the headlight hole and turn signal hole have been filled in for race purposes. Street bike guys love this because they can cut any headlight shape they wish into the front for a real custom look. Trick out your beat up old EX with one of our new fairings today! Price
	EX5002 Kawasaki EX500 Front number plate If you want to take your EX out to track days and dont want to drop the dough for a full race fairing this is the piece you need! Simply remove your headlight out of the stock fairing assembly and glue this piece into the inside where the headlight was, put some numbers on the front, and go racing. Trick piece! Price
	EX5003 Kawasaki EX500 Lower fairing - bellypan What we have here is a replacement part for the Kawasaki EX500 lower belly pan accessories. This lower was an accessory through Kawasaki motors for the 1987-1993 EX500s, and then it was factory equipment on the 1994 and newer EX500s. This is a direct replacement piece for the Kawasaki lower and bolts up to all of your stock brackets. Although, this part does not extend up to meet your upper fairing it still helps to finish off your EX and it gives you that sporty look. Get yours today! Price
	EX5003M Kawasaki EX500 lower fairing - Modified bellypan A lot of people race these EX500s and most race organizations require oil containment. This is exactly what you need! This piece is identical to the Kawasaki accessory belly pan for the EX500s with the exception that we filled in the bottom area for oil containment. This piece is legal oil containment for most race organizations. It mounts to the stock Kawasaki brackets. Price
	EX5004 Kawasaki EX500 Super sport race tail What we have here is a really cool race tail for your EX500s. This super sport race tail is basically the right and left seat sides, the right and left frame covers, the tail light area, and a solo seat cowl all molded as a one-piece unit. To mount onto your bike; simply take your long upholstery, slide it onto this fiberglass tail section, so that the solo seat cowl hides the passenger part of the seat, then take this upholstery/fiberglass assembly, slide it onto your chassis, wiggle it down until the seat locks latch, and then attach the two screws down by your knees. Your ready for a ride! To remove off of the bike, simply pull those two screws out, pop the seat locks, and remove the entire assembly off of the back of the chassis. Its pretty slick! This tail is legal for all race organizations. Street bike guys love this tail because it gives them the custom race bike look for their street bike. These guys simply cut the tail light hole open and mount onto their chassis just like the race guys do. Price
	2EX5005 Kawasaki EX500 Under seat enclosure This panel replaces all of that black plastic crap underneath your tail section. This panel really gives your EX a sport bike look. An average skill level and normal hand tools are required to mount this. You have to hack a lot of that black plastic rear fender crap off of there, but a crafty guy can have it mounted onto his bike faster than he can drink a 6-pack. It is well worth the effort. Price

Please note these very important items!

We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
It is the purchasers responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #	Description	Retail
KAWASAKI EX500 1987-93
EX5001	KAWASAKI EX500 UPPER FAIRING - STREET	$200.56
EX5001C	KAWASAKI EX500 UPPER FAIRNG -COMPETITION	$200.56
EX5002	KAWASAKI EX500 NUMBER PLATE	$20.76
EX5003	KAWASAKI EX500 LOWER FAIRING - FACTORY	$159.08
EX5003M	KAWASAKI EX500 LOWER FAIRNG - WITH OIL CONTAINMENT PAN	$172.90
EX5004	KAWASAKI EX500 TAIL SECTION-SUPERSPORT	$207.02
2EX5005	KAWASAKI EX500 UNDER SEAT ENCLOSURE UNDERTAIL	$110.66

Looking for some Kawasaki ZX7R bodywork or ZX9R or ZX10 fairings? Have a little Ninja EX 250 or EX 500 in need of some fairings? How about a quarter fairing for your GPZ or ZRX? Or a cafe seat for a Kawasaki H2 or KZ 650? Kawasaki dragbike anyone? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!