HONDA RC45 1994-96, RC 45 fairings, bodywork, fairing, upper, lower, mid, seat side, race, street, fender, tail, undertail, tank

All Prices are listed at the bottom of the page

	AirTECH has been supplying body work to American Honda for several years. Martin Adams, the big dog of the Smokin' Joe's race team, needed bodywork for the new RC 45 and came straight to AirTECH to whip it up. The competition upper fairing pictured is available as is the one piece lower, seat, and front fender for the RC 45. You might be familiar with a couple of guys who have used this bodywork to great effect, Miguel Duhamel, Ben and Eric Bostrom, even Mike Hale. Duhamel won the 95' AMA superbike championship using our very stuff on his bike. If you have an RC 45 and want to replace damaged parts, or want to prep it for the track, we've got what you need.
	RC451 Super Bike Upper This race upper fairing for the RC45 has air intake ducts in the upper area by the windscreen and on the side the radiator vents and a full inside shrouding around the radiator. This HRC spec race fairing can be used on street RC45’s with modifications for the headlights. This fairing has been used on a lot of other applications like NT 650 hawk. Give your sales rep a call and he’ll determine if this fairing will fit your application.
	RC452 Lower Belly Pan This Lower race belly pan fits our RC451 race upper fairing. It has a built in belly pan that should meet your race organizations oil containment requirements. Modifications to this belly pan are necessary if installed on any bike other than an RC45.
	RC453 Super Bike Race Tail This is an HRC sep race tail for the RC45 race bikes. It can be used on RC45 street bikes with the fabrication of a seat bracket.
	RC453H Hale Super Bike Tail In 1993, when American Honda Racing was competing with RVF 750’s they had a problem with their new rider Mike Hale. You see Mike was a big boy, tall and lean and couldn’t fit on their little race bikes. They came to Air-tech owner/designer Kent Riches who modified a tail section for their rider. And in 1994 when American Honda received their RC45 race bikes they had the exact same problem with their rider Mike Hale and asked us to the exact same thing we did with their RVF tails. Well no problem and you can see the result here. If you look closely you’ll see that the seat pan area from the back of the gas tank to the rear of the seat pan if longer giving Mike Hale more leg room. So if you a big boy racing a RC45 or want to put this tail on another bike this is exactly what you need.
	RC454 Front Fender American Honda gave this fender to us to fit their factory road race forks. But we’re told that it will also fit the streetRC45 forks as well.

Please note these very important items!

We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #	Description	Retail
RC45 1994-96
RC451	UPPER-COMPETITION	$262.80
RC452	LOWER	$228.24
RC453	TAIL SECTION-SUPERBIKE	$228.24
RC453H	TAIL SECTION-SUPERBIKE-"MIKE HALE"	$228.24
RC454	FENDER-FRONT "MODIFIED"	$82.99

Looking for some Honda CBR fairings? A CB 750 cafe seat? Some RC 30 fairings? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!