The RC 30 is certainly an exotic bike. It was
the superbike of its day. When American Honda was getting ready
to bring their new bike to the track, Race Director Ray Plum came
straight to AirTECH. We make a stock upper fairing complete with
headlight holes. Then we made competition version of the same piece
that has the light and signal holes filled in for a smooth race
look. The lower also comes in two different forms, one with the
stock vents and holes in place, and another modified by filling
in all the holes. Kind of like cheese, huh? With holes or without.
We make a one piece race seat with a dummy tail light in it. (And
any dummy can cut the tail light out and use the same tail section
on the street.) This is the bodywork you want if you are replacing
damaged parts, saving your expensive stock panels, or just trying
to lighten and customized your RC.
RC301
Street Upper
If you have a bust up RC 30 you'll be glad to know that we still
offer fairings for them. What we have here is a street replacement
fairing for an RC30s. This is also a very popular fairing for
the NT6509 hawk.
RC301C
Competition Upper
If you’re racing an RC30 this is exactly the piece that
you need. It has the exact detentions of our street RC30 fairing
with the exception that the headlight holes have been filled in
for race purposes. This is also a very popular race fairing for
the NT650 Hawk guys.
RC302
Lower Belly Pan
Whether you’re looking for crash replacement bodywork for
your RC30 or you need a lower belly pan for your Hawk conversion,
we’ve got exactly what you need. This one-piece belly pan
has radiator vents in the sides, the proper opening for the lower
radiator and a filled in belly pan for oil containment. Please
note it's not dammed in the back, so it will take a bit of fabrication
on your end if you want it dammed. Aren't you glad we still make
this stuff?
RC303
Super Bike Race Tail
This is a Super Bike style of race tail with a flat filled in
seat pan that fits on the RC30’s. It’s identical in
the exterior shape to the RC30 tail section with the exception
that it has a dummy taillight molded in the back. In the 80’s
and early 90’s the AMA required a taillight on the back
of the race bikes. So, we simply molded in this little taillight
on the back of it to meet the rule requirements. Pretty slick,
huh? This taillight is easily cut open if you need a crash replacement
tail for you street bike.
Notice:
Please
note these very important items!
We sell an unfinished unpainted
product, it is your responsibility to sand, finish,
and paint the parts you buy from us.
The parts we sell are un-drilled;
it is your responsibility to drill all of the mounting
holes and fit the parts onto your chassis.
All of our parts may or may not
include the internal mounting tabs. Please consult
with our sales representative if you have any questions
about mounting things like headlights and dashes.
It is the purchasers’ responsibility
to mount all of the products they purchase onto their
machine. If you need assistance mounting these products
call our sales reps for advise.
Part
#
Description
Retail
RC30 1989-90
RC301
UPPER-STREET
$262.80
RC301C
UPPER-COMPETITION
$221.31
RC302
LOWER
$207.02
RC303
TAIL SECTION-SUPERBIKE
$207.02
Looking
for some Honda CBR fairings?
A CB 750 cafe seat? Take
a look at our extensive collection. Airtech carries a full selection
of street and track fairings for most bikes!
RC301
RC302
RC303
