CBR XX 1100 1997-'02 BLACKBIRD

All Prices are listed at the bottom of the page

Blackbird, Blackbird...where art thou Blackbird? Over 60,000 feet high and out of radar detection. More than likely yours is going 160mph and gets caught in radar traps. Don't you wish you had radar reversible carbon fiber? No problem you've come to the right place, we can make it for you. What...not enough money for carbon fiber, well you can still replace your crash damage panels or lighten up your missile with our fiberglass bodywork. We make a street upper that uses the stock headlights or a competition upper with no headlight hole, but heck you can cut a hole and use one of our trick projector lights for a custom street bike look. We also offer the right and left fairing lowers, radiator shroud, front fender and even a few race seats, but you gotta get the carbon dash...after all that's what you'll be lookin at most of all... we know you ain't lookin at your speedo! Call your sales rep and get your cool new bodywork today!

 

CBRXX1C
Honda CBR1100 XX Blackbird Competition upper

This fairing is identical in exterior shape to your original black bird upper fairing with the exception that the headlight holes have been filled in for competition use. This fairing is used extensively in drag racing by multi-time street bike shoot out champion Kent Stotz. So if you are racing your bird or maybe want to cut a custom headlight shape out of the front of this for a cool street bike application, we've got the fairing you need. Give our sales reps a call today!

Price

CBRXX1S
Honda CBR1100 XX Blackbird Street Upper fairing

Do you need to replace your expensive crash damaged upper for your black bird? We've got what you need! We offer this light weight fiberglass replacement panel that is identical in exterior shape to your stock Honda piece, the only exception is that we do not do the inside tab work for the headlights. But that's no big deal, our sales reps will tell you how to mount the headlights and our fairing onto your chassis. A crafty guy can mount this on his bike in a couple of hours and save himself hundreds of dollars over the stock Honda piece. Give our sales reps for more details today!

Price

CBRXX2
Honda CBR1100 XX Blackbird Right lower

This is a lightweight, inexpensive, crash damaged replacement part for your bird. You will need to do a little tab fab if ya want to use this on a street bike but a crafty guy will be able to do it in a few min to save himself hundreds of dollars less than Honda wants for these parts.

Price

CBRXX3
Honda CBR1100 XX Blackbird Left lower
This is a lightweight, affordable replacement panel.You will need to do a little tab fab if ya want to use this on a street bike but a crafty guy will be able to do it in a few min to save himself hundreds of dollars that Honda wants for these parts

Price

CRBXX4
Honda CBR1100 XX Blackbird Super sport race tail

This is our one-piece super sport race tail for the black birds. This tail incorporates the right and left seat sides, tail light area, and a solo seat cowl all molded as a one-piece unit. Simply slide your long upholstery inside our fiberglass tail section and slide the combo onto your chassis. This one-piece race tail hides the passenger part of the seat so it gives you that race bike look. There is no passenger provision with this tail section. You will need to cut the taillight hole open if ya want to use it on a street bike but no big deal someone with an average skill level and a dremmel can do it in a few minutes. Give your bird a new look with our race tail today!

Price

 

CBRXX4S
Honda CBR1100 XX Blackbird +4 Stretch drag racing tail

This is a race tail that is four inches longer than stock. This tail section also includes a dual step seat assembly with a lower front pocket that locks you into the seat pan area on hard launches. It also has dual step that you can slide on up onto so you can flatten out your back for those high speed passes. The tail section also has a license plate bracket molded into the back of it. This seat was used by shoot out champion Kent Stotz for many years.

Price

CBRXX4S8
Honda CBR1100 XX Blackbird +8 Stretch drag race tail

This tail section is stretched eight inches over stock length. It has a dual step in the seat pan area for drag racing launches. This is the newest style of seat that Kent Stotz is using on his shoot out bike.

Price

CBRXX5
Honda CBR1100 XX Blackbird Front fender

This is a direct replacement for a black bird front fender. Simply drill the mounting holes and install.

Price

CBRXX7
Honda CBR1100 XX Blackbird Radiator shroud

This is the area between the right and left fairing lowers around the radiator area. This panel seals off the air between the lowers to avoid a bleed off around the sides of the radiator. This helps funnel air through the radiator and increases the cooling efficiency of the radiator.

Price

CBRXX8
Honda CBR1100 XX Blackbird Dash panel
This is a one-piece race dash panel assembly for black birds. This is the right and left dash panel and the instrument area all molded as a one-piece unit. Shoot our champion Kent Stotz uses this on his race bike, he drills holes in the front and mounts his boost gage and instruments in it. Street guys can simply cut this area open to work with the stock gage cluster. This piece is sold in fiberglass but is also available in carbon fiber. Ask our sales reps on pricing today!

Price

CBRXX9
Honda CBR1100 XX Blackbird Rear fender

This is a rear fender that mounts onto your swing arm that keeps dirt and debris from being thrown forward and damage your shock assembly. Keep crap off of your shock and make your bike look cool with this cool swing arm fender. This is sold in fiberglass but is also available in carbon fiber. Ask one of our sales reps about it today!

Price

CBRXX10
Honda CBR1100 XX Blackbird Race tank

This is a lightweight fiberglass race tank for the black bird. This fuel tank saves almost ten pounds off of the top of your motorcycle. You'll notice an immediate handling difference in your motorcycle without all that weight on the top of it. This fuel tank has no provisions for the fuel level sending unit and comes with two 3/8ths bungs in the bottom for external fuel pumps only.

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

CBRXX10S
Honda CBR1100 XX Blackbird Slammed fuel tank

This gas tank is two inches narrower and three inches lower that stock gas tank. Don't even think about racing a bike without using one of these smaller gas tanks. The black bird gas tank is huge! Not only does that thing weigh a ton, but it's just a monster to try to crawl around. This slammed gas tank is the solution! We know Kent Stotz would not have won any of his championships without this gas tank. Just ask him, he'll agree. Get yours today!

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

CBRXX10S2
Honda CBR1100 XX Blackbird Slammed Fuel Tank 2

This is an exaggerated version of our slammed fuel tank for the Black Bird. This tank is the next step smaller for those very serious drag racers like Kent Stotz. This tank will be used on his shoot out bike in his attempt to regain the Pro Star Championship in 2005.

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
HONDA CBR1100 XX 1997-'02 BLACK BIRD
CBRXX1C
CBR1100 XX BLACKBIRD UPPER FAIRING - COMPETITION
$207.02
CBRXX1S
CBR1100 XX BLACKBIRD UPPER FAIRING - STREET
$213.10
CBRXX2
CBR1100 XX BLACKBIRD LOWER FAIRING - RIGHT
$207.02
CBRXX3
CBR1100 XX BLACKBIRD LOWER FAIRING - LEFT
$207.02
CBRXX4
CBR1100 XX BLACKBIRD TAIL SECTION - SUPERSPORT
$213.10
CBRXX4S
CBR1100 XX BLACKBIRD TAIL SECTION - DRAG RACE (+4 EXTENDED)
$228.24
CBRXX4S8
CBR1100 XX BLACKBIRD TAIL SECTION - DRAG RACE (+8 EXTENDED)
$228.24
CBRXX5
CBR1100 XX BLACKBIRD FENDER - FRONT
$82.99
CBRXX7
CBR1100 XX BLACKBIRD RADIATOR GUARD
$82.99
CBRXX8
CBR1100 XX BLACKBIRD DASH PANEL (NOT CARBON FIBER)
$152.40
CBRXX9
CBR1100 XX BLACKBIRD FENDER - REAR
$82.99
CBRXX10
CBR1100 XX BLACKBIRD FUEL TANK - DRAG RACE
$687.63
CBRXX10S
CBR1100 XX BLACKBIRD FUEL TANK - DRAG RACE SLAMMED
$687.63
CBRXX10S2
CBR1100 XX BLACKBIRDFUEL TANK - DRAG RACE SLAMMED - STOTZ
$687.63
CBRXX1DF
CBR1100 XX BLACKBIRD UPPER - DRAG RACE FAIRING
$687.63

 

Looking for some Honda CBR fairings? A CB 750 cafe seat? Some RC 30 fairings? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices