CBR 600 F3 1997-98

All Prices are listed at the bottom of the page

 

Life is all about making choices and we at Airtech have plenty of stuff to choose from.

Below that you see our Smokin Joe's racing kit, as used by the indomitable Miguel Duhamel, who won the five AMA 600 Supersport championships with it in the nineties.

Not only do we maker the stock replacement fenders and lowers, we also make a 2-piece Supersport front fairing and two different race tails. To top it all off we have a lightweight racing fuel tank available, and an undertail to clean up your rear end.

Hold on, we're not done yet...

We have two different body kits available for your Honda CBR 600 F3. The sculpted, bulbeous, scrumptious, voluptuous, CREA kit will put some schwing back into your ride. You're guaranteed to pick up chicks with this bodywork so we've made the seat cowl removeable. Just leave that helmet on, ok?
Just kiddin'. Chicks dig a guy with a sense of humor. We've heard.

The final option is the Smokin' Joe kit. It's got the 2-piece front fairing, front fender and tail section all in one brilliant package for a great price. Street legal. Take your pick gentlemen...

4CBR61HRC
Honda CBR 600 F3 Supersport upper fairing

This is the upper half of the HRC Supersport fairing assembly for the Honda CBR 600 F3. The fairing splits around the cylinders for easy access and has only one parting seam, so it is also a bitchin' fairing for an ultra clean custom street bike.

Only works with 3CBR62HRC lower fairing.

Price

 

3CBR62HRC
Honda CBR 600 F3 Lower fairing - no oil containment

This is the lower half of the HRC Supersport fairing assembly for the Honda CBR 600 F3. This lower is open at the bottom, like stock lowers, and does not have oil containment.

Only works with 3CBR61HRC upper fairing.

Price

 

4CBR62HRC
Honda CBR 600 F3 Lower fairing - belly pan with oil containment

This is the lower half of the HRC Supersport fairing assembly for the Honda CBR 600 F3. This lower has been filled in for oil containment, as required by most racing organizations.

Only works with 3CBR61HRC upper fairing.

Price

3CBR62
Honda CBR 600 F3 Right lower fairing

This is a lightweight crash replacement for your Honda CBR 600 F3. Simply drill the mounting holes and attach it to your bike. When you take it off and paint it no one will ever know the difference! Freshen up that ratty beat up Honda CBR 600 F3 with one of our new body panels today!

Price

3CBR63
Honda CBR 600 F3 Left lower fairing

This is a lightweight crash replacement for your Honda CBR 600 F3. Simply drill the mounting holes and attach it to your bike. When you take it off and paint it no one will ever know the difference! Freshen up that ratty beat up Honda CBR 600 F3 with one of our new body panels today!

Price

4CBR60CP
Honda CBR 600 F3 Oil containment belly pan insert

If you are racing a CBR 600 F3 with stock style lowers, you need one of these inserts. Legal for most racing organizations.

Works with the stock style lowers part# 3CBR62 and 3CBR63.

Price

4CBR69S
Honda CBR 600 F3 Supersport race tail

Here is a real cool piece for your CBR 600 F3. We've taken the right and left seat sides, the tail light area, and the solo seat cowl and molded them into a one-piece race tail. Simply slide your long upholstery inside this fiberglass panel and it hides the passenger part of the seat. Then take the seat assembly and slide that down your chassis, attach the mounts. Give your street bike a custom race look with this supersport race tail. Get yours today!

Price

4CBR69B
Honda CBR 600 F3 Super bike race tail

This tail section is similar to the supersport race tail with the exception of that the seat pan area has been filled in for this race padding. A lot of professional racers like this super bike style seat because they can feel the rear suspension and rear tire better, they also feel that the stock upholstery dampens the effect and that they can get better handling out of there chassis with this style of tail section. This seat works with closed cell race foam, available through us.

Price

4CBR69
Honda CBR 600 F3 Undertail

Very cool under tail that cleans off the underneath of your tail section. Simply hack out all of that stock black, plastic crap that sticks below your body panels and mount our lightweight fiberglass piece underneath there. Custom paint or color-match the rest of your bodywork for a cool street look. One thing that you may notice is that our under tail has a license plate bracket already molded into it so there are no ugly brackets needed to mount your license plate on it. This is a cool piece! Get yours today!

Price

 

4CBR66
Honda CBR 600 F3 Front fender (with hole on the side)

Replace you busted front fender with our lightweight fiberglass piece. Simply drill the mounting holes, paint, and attach it onto your CBR 600 F3.

Price

 

3CBR66
Honda CBR 600 F3 Front fender

Replace you busted front fender with our lightweight fiberglass piece. Simply drill the mounting holes, paint, and attach it onto your CBR 600 F3.

This is the early F3 style fender, fits '97/'98 as well.

Price

4CBR614
Honda CBR 600 F3 Rear swing arm fender

Replace your crash damaged or missing rear swing arm fender with our lightweight fiberglass piece. Simply drill the mounting holes and attach it onto the Honda CBR 600 F3 chassis.

Price

 

 

2CBR614
Honda CBR 600 F3 Rear swing arm fender

Replace your crash damaged or missing rear swing arm fender with our lightweight fiberglass piece. Simply drill the mounting holes and attach it onto the Honda CBR 600 F3 chassis.

This is the early F3 style fender, fits '97/'98 as well.

Price

 

2CBR613
Honda CBR 600 F3 Fuel tank

Check out our lightweight racing gas tank! This fiberglass tank is considerably lighter than the stock tank. It shaves some weight off of the top and will make your bike easier to flick from side to side, so it's a primo way to improve the handling on your Honda CBR 600 F3.

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent! It is possible that the gas tank will rupture and spill fuel possibly catching your motorcycle on fire if you happen to crash on the street. This lightweight racing gas tank is recommended for racing purposes only!

Price

 

4CBR6SJR
Smokin' Joe Replica body kit
This is the Airtech bodywork that Honda used on Miguel Duhamel's Smokin' Joe's CBR 600 in the first half of the '90s. Miguel went on to win no less than FIVE 600 Supersport Championships. Nuff said...

Now you have a chance to put this piece of racing history on your CBR 600 F3.

The Smokin' Joe's two piece fairing assembly consists of a street legal main upper with a single round headlight hole for that European endurance look. The lower fairing is the same as most pros use, complete with oil containment pan as most race organizations require. The supersport tail uses the stock upholstery and the kit is completed by a front fender. Get yours today!
Click here for more info

Price

CREA61K
Crea body kit

This is a complete body conversion kit for the '91-'94 CBR 600 F3. The kit contains main upper fairing, the lower belly pan, the front fender, tail section, and a removable solo seat cowl. This body kit bolts up to your CBR 600 using all your stock Honda brackets and hardware. Please note that the Honda front main bracket bends like butter so we strongly recommend replacing your bracket with a new Honda piece.
Click here for more info

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
HONDA CBR 600 F3 1997-98
4CBR61HRC HONDA CBR 600 F3 HRC RACING UPPER FAIRING - COMPETITION $394.22
4CBR62HRC HONDA CBR 600 F3 HRC LOWER FAIRING WITH OIL CONTAINMENT $207.48
3CBR62 HONDA CBR 600 F3 LOWER FAIRING - RIGHT $187.27
3CBR63 HONDA CBR 600 F3 LOWER FAIRING - LEFT $187.27
4CBR6OCP HONDA CBR 600 F3 OIL PAN TO FIT STOCK 3-PIECE FAIRING $89.90
4CBR66 HONDA CBR 600 F3 FENDER - FRONT (W/ HOLE IN THE SIDE) $73.48
3CBR66 HONDA CBR 600 F3 FENDER - FRONT $62.25
4CBR69S HONDA CBR 600 F3 TAIL SECTION - SUPERSPORT $207.02
4CBR69B HONDA CBR 600 F3 TAIL SECTION - SUPERBIKE $207.02
4CBR69 HONDA CBR 600 F3 UNDER SEAT ENCLOSURE $110.66
4CBR614 HONDA CBR 600 F3 FENDER - REAR SWING ARM $82.99
2CBR613 HONDA CBR 600 F3 FUEL TANK $655.35
2CBR614 HONDA CBR 600 F3 FENDER -REAR SWING ARM $82.99
CREA61K HONDA CBR 600 F2 F3 CREA COMPLETE KIT $895.00
4CBR6SJR HONDA CBR 600 F2 F3 SMOKIN' JOE REPLICA $595.00

Looking for some Honda CBR fairings? A CB 750 cafe seat? Some RC 30 fairings? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices