| 
|
Pictured in the middle is our deluxe
two piece F3 fairing, which was originally designed for HRC. Yes,
that HRC.
Below that you see our Smokin Joe's racing
kit, as used by the indomitable Miguel Duhamel, who won the five
AMA 600 Supersport championships with it in the nineties.
Both the HRC and Smokin Joe assemblies
split horizontally around the cylinders for easy access to the
bike's innards. The front radiator shroud and hatch doors have
been molded in for a clean flowing look.
The two seats shown on the left are our
96' edition F3 race seats. The bottom seat is our supersport style
and works with the stock F2 or F3 (pre-'97) upholstery.
If it is good enough for that Miguel
guy to use, you know it's a premium item. The other seat is a
little something we grafted off of the RC 45 to create an awesome
look for the F2 and F3. This particular unit has the seat pan
section filled in and is designed to be used with our molded closed
cell foam seat pads. This seat was used by Steve Crevier at Smokin'
Joe's as well as Erion Racing. This is the best stuff on the market
and it is available to you. You lucky dog!
|
 |
 3CBR61HRC
Honda CBR 600 F3 Supersport upper fairing
This is the upper half of the HRC Supersport fairing assembly
for the Honda CBR 600 F3. The fairing splits around the cylinders
for easy access and has only one parting seam, so it is also a
bitchin' fairing for an ultra clean custom street bike.
Only works with 3CBR62HRC lower fairing.
Price
|
 |
 3CBR62HRC
Honda CBR 600 F3 Lower fairing - no oil containment
This is the lower half of the HRC Supersport fairing assembly
for the Honda CBR 600 F3. This lower is open at the bottom, like
stock lowers, and does not have oil containment.
Only works with 3CBR61HRC
upper fairing.
Price
|
 |
4CBR62HRC
Honda CBR 600 F3 Lower fairing - belly pan with oil containment
This is the lower half of the HRC Supersport fairing assembly
for the Honda CBR 600 F3. This lower has been filled in for oil
containment, as required by most racing organizations.
Only works with 3CBR61HRC
upper fairing.
Price
|
 |
 3CBR62
Honda CBR 600 F3 Right lower fairing
This is a lightweight crash replacement for your Honda CBR 600
F3. Simply drill the mounting holes and attach it to your bike.
When you take it off and paint it no one will ever know the difference!
Freshen up that ratty beat up Honda CBR 600 F3 with one of our
new body panels today!
Price
|
 |
 3CBR63
Honda CBR 600 F3 Left lower fairing
This is a lightweight crash replacement for your Honda CBR 600
F3. Simply drill the mounting holes and attach it to your bike.
When you take it off and paint it no one will ever know the difference!
Freshen up that ratty beat up Honda CBR 600 F3 with one of our
new body panels today!
Price
|
 |
 2CBR69S
Honda CBR 600 F3 Supersport race tail
Here is a real cool piece for your CBR 600 F3. We've taken the
right and left seat sides, the tail light area, and the solo seat
cowl and molded them into a one-piece race tail. Simply slide
your long upholstery inside this fiberglass panel and it hides
the passenger part of the seat. Then take the seat assembly and
slide that down your chassis, attach the mounts. Give your street
bike a custom race look with this supersport race tail. Get yours
today!
Price |
 |
2CBR69W
Honda CBR 600 F3 Supersport race tail
This is the WERA race legal version of the 2CBR69S.
Price |
 |
3CBR69S
Honda CBR 600 F3 RC45 Replica Supersport race tail
This is our RC45 Replica racetail for the Honda CBR 600 F3, that
works with the stock upholstery. Give your street bike a custom
race look with this supersport race tail. Get yours today!
Price |
 |
2CBR69B
Honda CBR 600 F3 Super bike race tail
This tail section is similar to the supersport race tail with
the exception of that the seat pan area has been filled in for
this race padding. A lot of professional racers like this super
bike style seat because they can feel the rear suspension and
rear tire better, they also feel that the stock upholstery dampens
the effect and that they can get better handling out of there
chassis with this style of tail section. This seat works with
closed cell race foam, available through us.
Price |
 |
2CBR69BS
Honda CBR 600 F3 Super bike race tail - short version
Like the 2CBR69B but ehm... shorter. This seat has a much lower
profile and will make your rear end look smaller. Ladies?
Price |
 |
3CBR69B
Honda CBR 600 F3 RC45 Replica Superbike race tail
This is our RC45 Replica racetail for the Honda CBR 600 F3
, that has a filled in seat pan to work with closed cell
racing foam, available through us. Give your street bike a custom
race look with this superbike race tail. Get yours today!
Price |
| 
|
MFP5
If you are the person with the highest standards on the
block, put this on your superbike seat.. These aerospace urethane
medium density pads are the ultimate for appearance, durability,
and comfort. They can either be glued on with weatherstrip adhesive
or attached with velcro. Specifically designed for the Honda CBR600
F2/F3 '91-'96 superbike tails.
Price |
 |
 2CBR615
Honda CBR 600 F3 Undertail
Very cool under tail that cleans off the underneath of your tail
section. Simply hack out all of that stock black, plastic crap
that sticks below your body panels and mount our lightweight fiberglass
piece underneath there. Custom paint or color-match the rest of
your bodywork for a cool street look. One thing that you may notice
is that our under tail has a license plate bracket already molded
into it so there are no ugly brackets needed to mount your license
plate on it. This is a cool piece! Get yours today!
Price
|
 |
 3CBR66
Honda CBR 600 F3 Front fender
Replace you busted front fender with our lightweight fiberglass
piece. Simply drill the mounting holes, paint, and attach it onto
your CBR 600 F3.
Price |
 |
 2CBR614
Honda CBR 600 F3 Rear swing arm fender
Replace your crash damaged or missing rear swing arm fender with
our lightweight fiberglass piece. Simply drill the mounting holes
and attach it onto the Honda CBR 600 F3 chassis.
Price
|
 |
 2CBR613
Honda CBR 600 F3 Fuel tank
Check out our lightweight racing gas
tank! This fiberglass tank is considerably lighter than the stock
tank. It shaves some weight off of the top and will make your
bike easier to flick from side to side, so it's a primo way to
improve the handling on your Honda CBR 600 F3.
Price
Please note! This gas tank
is not recommended for street use, this is a fiberglass gas tank
that will not dent! It is possible that the gas tank will rupture
and spill fuel possibly catching your motorcycle on fire if you
happen to crash on the street. This lightweight racing gas tank
is recommended for racing purposes only!
|
| 
|
 4CBR6SJR
Smokin' Joe Replica body kit
This is the Airtech bodywork that Honda used on Miguel
Duhamel's Smokin' Joe's CBR 600 in the first half of the '90s.
Miguel went on to win no less than FIVE 600 Supersport Championships.
Nuff said...
Now you
have a chance to put this piece of racing history on your CBR
600 F3.
The Smokin'
Joe's two piece fairing assembly consists of a street legal main
upper with a single round headlight hole for that European endurance
look. The lower fairing is the same as most pros use, complete
with oil containment pan as most race organizations require. The
supersport tail uses the stock upholstery and the kit is completed
by a front fender. Get yours today!
Click here for more
info
Price
|
| 
|
CREA61K
Crea body kit
This is a complete body conversion kit for the '91-'94 CBR 600
F2 and '95-'98 F3. The kit contains main upper fairing, the lower
belly pan, the front fender, tail section, and a removable solo
seat cowl. This body kit bolts up to your CBR 600 using all your
stock Honda brackets and hardware. Please note that the Honda
front main bracket bends like butter so we strongly recommend
replacing your bracket with a new Honda piece.
Click here for more info
Price |