SPORT CLASSIC '06-'09

All Prices are listed at the bottom of the page

When Chris Gorel at ThunderDuc Racing asked us to help him out with some grade A bodywork for his Sport Classic racer we immediately said: "Yes!"

If you're racing one of these beauties as well, or simply want a set of skins for track days, give us a call today and we'll say "Yes!" to you too!

We're still droolin' over that Zard exhaust system...

 

DSC11C1P
Ducati Sport Classic half fairing - Competition, one piece
Corsa half fairing. Fits straight onto '06 Paul Smart and '07/'08 Sport 1000S.

Will fit the other models ('06 Sport, GT and Biposto) with a Ducati Corse/aftermarket front fairing bracket.

The mounting brackets underneath the gas tank are fairly simple (see pic). It's just a little zig zag bracket that is sandwiched between the tank mounting cups and the frame. You should be able to make your own!

Price

4GSXR79
Suzuki GSXR 750 windscreen air ducts
These are the air intake ducts that they used on the Thunderduc. We do not install them, but you can bond these ducts into your fairing to replicate the Thunderduc setup. We can also supply matching smoothbore duct hose, ask your sales rep.

Outlet OD 1.75"

Price

DSC11S1P
Ducati Sport Classic half fairing - Street, one piece
One piece version of the stock Paul Smart half fairing that integrates the upper fairing and the standard, short side fairings into one piece.

The parting seam and turn signal mounts have been eliminated.

Will fit the other models ('06 Sport, GT and Biposto) with a Paul Smart/aftermarket front fairing bracket.

Price

DSC14
Ducati Sport Classic tail section - competition
Fits all Sport Classics including GT. Fabrication of rear mount required (see picture).

Price

Paul Smart / Sport 1000S

We've worked hard to make the rare Paul Smart or 1000S lower fairings available at a resonable price, we've seen sets go for $2000 on Ebay.

These lower fairings will mount to your stock Paul Smart or Sport 1000S upper fairing or to our replacement or track fairing. They do not work with the one-piece "Thunderduc" Corsa fairing above.

You will have to make 4 simple brackets, we've measured them and made drawings to make this easy for you, see below PDF files:

OEM Ducati Installation instructions (scan)

Right, rear bracket (#1 in Ducati instructions)

Right, front bracket (#2)

Left, front bracket (#3)

Left, rear bracket (#4)

DSC11C
Ducati Sport Classic half fairing - competition
This is the stock Paul Smart fairing with the headlight opening filled in for track use. You can install it with the stock, short side fairings or with the long Paul Smart LE lowers listed below.

Fits straight onto '06 Paul Smart and '07/'08 Sport 1000S. Will fit the other models ('06 Sport, GT and Biposto) with a Ducati Corse/aftermarket front fairing bracket.

Price

DSC11S
Ducati Sport Classic half fairing - street
This is the replacement upper fairing for the Paul Smart/1000S. You can install it with the stock, short side fairings or with the long Paul Smart lowers listed below.

Fits straight onto '06 Paul Smart and '07/'08 Sport 1000S. Will fit the other models ('06 Sport, GT and Biposto) with a Paul Smart/aftermarket front fairing bracket.

Price

DSC12
Ducati Sport Classic - Paul Smart long lower fairing - Right

These are the rare, long Paul Smart or 1000S lowers from the accessory catalog. They will bolt on to your stock upper fairing after you remove the short lower ears. Very hard to find and extremely expensive when you do, until now! The outline of the numberplate is lightly raised in the gelcoat to facilitate painting but can be easily sanded out if not desired.

You will have to make 4 simple mounting brackets (2 each side) to install these on your bike. We have made drawings to help you, see above.

Price

DSC13
Ducati Sport Classic - Paul Smart long lower fairing - Left

These are the rare, long Paul Smart or 1000S lowers from the accessory catalog. They will bolt on to your stock upper fairing after you remove the short lower ears. Very hard to find and extremely expensive when you do, until now! The outline of the numberplate is lightly raised in the gelcoat to facilitate painting but can be easily sanded out if not desired.

You will have to make 4 simple mounting brackets (2 each side) to install these on your bike. We have made drawings to help you, see above.

Price

Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
DUCATI SPORT CLASSIC GT PAUL SMART 1000S '06-'09
DSC11C
DUCATI SPORT CLASSIC FAIRING - COMPETITION
$228.00
DSC11S
DUCATI SPORT CLASSIC FAIRING - STREET (REPLACEMENT)
$228.00
DSC11C1P
DUCATI SPORT CLASSIC FAIRING - CORSA COMPETITION 1-PIECE
$279.00
DSC11S1P
DUCATI SPORT CLASSIC FAIRING - CORSA STREET 1-PIECE
$279.00
DSC12
DUCATI SPORT CLASSIC - PAUL SMART LONG LOWER - RIGHT
$228.00
DSC13
DUCATI SPORT CLASSIC - PAUL SMART LONG LOWER - LEFT
$228.00
DSC14
DUCATI SPORT CLASSIC RACE TAIL SECTION
$207.04
4GSXR79 SUZUKI GSXR 750 YOSHIMURA AIR DUCTS $62.25

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices