BMW 'R' BOXER

All Prices are listed at the bottom of the page

So you own an old airhead, huh? Cool bike! If your looking for some wind protection in the shape of a quarter fairing, you've come to the right place!

We also make a beautiful cafe seat. This is the original seat, sculpted by our head designer Kent Riches, that some weasel knocked off and is now selling on Ebay from his garage in Bumfuck, CO. No it is not a "Knoscher" or "Rennsport" seat nor are they the original designer. It was actually based on a Ducati 900 SS seat and we spent many hours modifying it and molding it into this cool tail before they knocked it off. Thank you.

We also have full sized and bobbed front and rear fenders, dash panels to hold your clocks, a 10 gallon fuel tank, a cafe style half fairing and even a competition upper if you're crazy enough to race one of these bad boys...

Airhead owners get all the chicks...

R90S
BMW R90S cafe quarter fairing - 8"
BMW R90 quarter fairing, but will fit other models as well. 8.5" opening for the oversized BMW R-series headlight (tapers from 8.5" at the face to 8.25"). This is a sleek version without turn signal mounts.

We recommend installation with the dash panel (R90S2, see below). Stock windscreens will be a little long in the back when installed without a dash and may require trimming.

Price

R90S7
BMW R90 cafe quarter fairing - 7"
BMW R90 quarter fairing, modified to accept a standard 7" bulb.

We recommend installation with the dash panel (R90S2, see below). Stock windscreens will be a little long in the back when installed without a dash and may require trimming.

Price

R90S2
BMW Dash panel for R90S and R90S7 quarter fairing
This dash panel is sandwiched between the fairing and the windshield. The windscreen screws will pass through the windscreen, a rubber washer, trhe dash and the fairing. This is why stock windscreens will be a little long in the back when installed without a dash and may require trimming.

Price

R90SC
BMW Competition quarter fairing
Are you racing your airhead? You need one of these!

Price

R90ST
BMW R90S Quarter fairing with turn signal mounts
BMW R90 replacement quarter fairing, but will fit other models as well. 8.5" opening for the oversized BMW headlight (tapers from 8.5" at the face to 8.25"). This is the version with turn signal mounts.

We recommend installation with the dash panel (R90ST2, see below). Stock windscreens will be long in the back when installed on a fairing without the dash and may require trimming.

Price

R90ST2
BMW Dash panel for R90ST quarter fairing
This dash panel is sandwiched between the fairing and the windshield. The windscreen screws will pass through the windscreen, a rubber washer, trhe dash and the fairing. This is why stock windscreens will be a little long in the back when installed without a dash and may require trimming.

Price

R90SWS
BMW R90S Windscreen - smoke
Stock size, dilled. Fits stock R90S fairing and all variations above. Windscreens may be a little long in the back when installed without a dash and may require trimming.

Price

CCF
Classic cafe 1/2 fairing
This sculpted cafe half fairing has fairly tall windscreen height to use either clubman or low BMW style handlebars.

Price


BBMW1
50's BMW Rennsport style fly screen
Headlight opening 7"

Price

BMWRSS1
BMW Cafe seat with rondel
Classic Rennsport style seat with a recessed spot on the tail for a BMW rondel. The seat comes with an aluminum bracket, that you will have to mount inside the back of the tail with some 5-minute epoxy (available from any hardware store) so it attaches to the accessory mount in the back. We used to glass these mounts into the back of the tail but have noticed the mount on the bike can be off by as much as 1/4", so it's better if you do it yourself, so you can mount the seat perfectly straight.

We also offer two different styles of seat pans, for use with both short and long tanks, see below.

Larger photo

Price

BMWRSS2
BMW Cafe seat without rondel
Classic Rennsport style seat with a smooth rear hump. The seat comes with an aluminum bracket, that you will have to mount inside the back of the tail with some 5-minute epoxy (available from any hardware store) so it attaches to the accessory mount in the back. We used to glass these mounts into the back of the tail but have noticed the mount on the bike can be off by as much as 1/4", so it's better if you do it yourself, so you can mount the seat perfectly straight.

We also offer two different styles of seat pans, for use with both short and long tanks, see below.

Larger photo

Price

BMWRSSUPS
BMW Cafe Rennsport seatpan - short
This upholstery pan fits our Rennsport cafe seats. It kicks up in the front area to hide the unsightly gap in the back of the tank where the tank mounting bolts live. This is the short seatpan, to work with the longer R90S style fuel tanks.

Length: 16.25"

Please note: does not fit BMWRSS3 - RS54 style seat

Price

BMWRSSUPL
BMW Cafe Rennsport seatpan - long
This upholstery pan fits our Rennsport cafe seats. It kicks up in the front area to hide the unsightly gap in the back of the tank where the tank mounting bolts live. This is the long seatpan, to work with the short style fuel tanks Tanks that are definitely short, to our knowledge:
- toaster tanks
- tanks with rubber knee pads

Length: 18"

Please note: does not fit BMWRSS3 - RS54 style seat

Price

BMWRSS3
BMW Cafe Rennsport seat
This Rennsport seat was inspired by the RS54. It's designed to work with a shortened subframe that is cut behind the shock mounts. The cool thing is the subframe just bolts onto R models so you could pick up a spare sub section and modify it.

We've removed the skirt notching (as seen on the seats above) that clears the frame tabbing for a cleaner look. You can trim this seat to suit.

Price

BMWR1
BMW Front fender - long

Long /5 style front fender. Fits '70-'73 R50/5, R60/5 and R75/5.

Larger photo

Price

BMWR1M
BMW front fender - short
Short /5 style front fender. Fits '70-'73 R50/5, R60/5 and R75/5.

Larger photo

Price

BMWR2
BMW Rear fender
R-series rear fender

Larger photo

Price

BMWBT
BMW Fuel tank -10 gallon
Large Heinrich style touring tank for all you Iron Butts.

** Currently not available. Pricing to be determined. **

Price

 

Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers’ responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
BMW 'R' SERIES BOXER
R90S
BMW QUARTER CAFE FAIRING
$145.90
R90S2
BMW DASH PANEL
$80.07
R90SC
BMW COMPETITION QUARTER FAIRING
$145.90
R90ST
BMW QUARTER FAIRING W/ TURN SIGNAL MOUNTS
$145.90
R90ST2
BMW DASH PANEL
$80.07
R90SWS
BMW R90S WINDSCREEN - SMOKE
$99.95
CCF
BMW CLASSIC CAFE HALF FAIRING
$262.80
BBMW1
BMW RENNSPORT FLY SCREEN
$103.32
BMWRSS1
BMW CLASSIC RENNSPORT CAFE SEAT WITH RONDEL
$131.41
BMWRSS2
BMW CLASSIC RENNSPORT CAFE SEAT - NO RONDEL
$131.41
BMWRUPS
BMW CLASSIC RENNSPORT CAFE SEATPAN - SHORT
$38.72
BMWRUPL
BMW CLASSIC RENNSPORT CAFE SEATPAN - LONG
$38.72
BMWRSS3
BMW CLASSIC RENNSPORT CAFE SEAT - RS54 STYLE
$131.41
BMWR1
BMW FRONT FENDER - LONG
$82.99
BMWR1M
BMW FRONT FENDER - SHORT
$82.99
BMWR2 BMW REAR FENDER $92.21

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices