SPORTSTER

All Prices are listed at the bottom of the page

HDSF1
Harley Sportster Quarter fairing
Small quarter fairing or fly screen with 5.75" headlight opening to fit the Sportster headlight.

Price

HDS1
Harley Sportster Front fender
Lightweight version of the stock steel front fender for 19" front wheel.

Price

HDFF2
Harley Davidson front fender

Wheel size: 19"
Width: 4.75"

Price

UFF1
Universal front fender
This is a great classic looking fender for a modern, inverted front end conversion on a Sportster.

Originally designed for a GSXR fork with a 17" wheel and a 120 tire, but will fit many others, you will need to make some mounting brackets either way. We left this fender long front/back, you can easily trim it shorter if you prefer a sportier look.

Wheel size: 17"
Width: 5"
Length (along fender):32"

Price

HDWGH1
Harley Wide Glide headlight nacelle with turn signal mounts
Sleek headlight nacelle covers fork legs and headlight. We modified a standard nacelle to fit on a set of inverted GSXR forks with custom clamps. The forks we used here measure 8-3/8" c/c and 10-3/8" outside to outside fork top. The nacelle does not come with the fork holes cut so if your fork measurements fall inside ours you can make this nacelle work. Standard version is fiberglass, shown in optional carbon fiber. Ask your sales rep for carbon pricing!

Price

HDWGH2
Harley Wide Glide headlight nacelle without turn signal mounts
Sleek headlight nacelle covers fork legs and headlight. We modified a standard nacelle to fit on a set of inverted GSXR forks with custom clamps. The forks we used here measure 8-3/8" c/c and 10-3/8" outside to outside fork top. The nacelle does not come with the fork holes cut so if your fork measurements fall inside ours you can make this nacelle work. Standard version is fiberglass, shown in optional carbon fiber. Ask your sales rep for carbon pricing!

Price

HDSMCC
Harley Sportster Master cylinder cover
Covers up the rear master cylinder. Standard version is fiberglass, shown in optional carbon fiber. Ask your sales rep for carbon pricing!

Price

HDSBBC
Harley Sportster Battery box cover
Covers up the ugly battery box. Standard version is fiberglass, shown in optional carbon fiber. Ask your sales rep for carbon pricing!

Price

HDSOTC
Harley Sportster Oil tank cover
Covers up the ugly stock oil tank. Standard version is fiberglass, shown here in optional carbon fiber. Ask your sales rep for carbon pricing!

Price

HDST1
Harley Sportster Fuel tank
This is a cool teardrop shaped fuel tank. Comes with two crossover fittings in the front and a 3/8" NPT fuel bung on the left for a Pingel valve. The back of the tank has a flat tab to facilitate a mounting point, you will have to drill and tap two holes in the steering head up front. Shown here in optional carbon fiber, standard version is fiberglass.

Price

XR750 Dirt Track Conversion

The iconic XR750... the original design still stands after 40 years. 'Nuff said. Now you can fit these parts on your Sportster frame. We've redesigned the original XR750 parts to fit seamlessly on your Sportster.

HDSXRDTT
Harley Sportster XR750 dirttrack tank

This is the XR750 replica tank for your Sportster. The XR750 frames had a very skinny (1") backbone so the original XR750 tank would not fit onto the stock Sportster frame (1.65").

For this conversion tank, the original XR750 top shell is used so from the outside it is identical to the original. But we have redesigned the tunnel to fit this tank to a standard Sportster frame.

You will need to weld two tabs to the frame for the stud mounts. The rear of the tank has an insert so you can attach a bracket or hold down strap.

Price

HDSXRDTS
We designed this XR750 conversion seat that conforms nicely to the tapered Sportster frame.
This seat has a taillight/licenseplate bracket integrated into the back.

Price

XR7502DT
HarleyXR750 Dirttrack seat
What can we say... the classic XR750 dirt track style racing seat. Lightweight and strong. Requires fabrication of seat mounts to fit onto Sportster frame but is fairly straight forward to install.

Price

XR750 TT Road Race Conversion

Want to turn your Sportster into a XR750TT replica? Over the years, many people have used our parts to build their version of the infamous road racer. We have some crafty customers as you can tell from the pictures. The fairings and seat can be made to work but the XR750TT fuel tanks just wouldn't fit... until now!

We modified and XR750 tank with a new tunnel that is wider to fit the Sportster frame. We also designed a XR750 conversion seat that will drop right onto the Sportster frame and have a storage compartment and taillight bracket.

The original XR750 road race bike shown on the left.

HDSXR7505
Harley Sportster XR750 TT Road race tank

This is our XR750 replica road race tank for your Sportster. The XR750 frames had a very skinny (1") backbone so the original XR750 tank wouldn't fit onto the stock Sportster frame (1.65"). We have completely redesigned the tunnel to fit this tank to the standard Sportster frame.

The original 5GL XR750 top shell was modified to match the Sportster tunnel. This tank has a neat dimple top/front and can be bolted to the backbone (you need to drill and tap) right behind the headstock. The tank also has a large mounting tab in the back to facilitate a rear mount. A 3/8" fuel bung is normally placed on the front left side of the tank, we can supply a matching Pingel valve.

Price

HDSXR75065
Harley Sportster XR750 TT Road race tank

This is a replica of the large (6.5GL) XR750 road race tank for your Sportster. The XR750 frames had a very skinny (1") backbone so the original XR750 tank wouldn't fit onto the stock Sportster frame (1.65"). So we have completely redesigned the tunnel to fit this tank to the standard Sportster frame. The heavily sculpted top is the same as the original 6.5GL XR750 tank. A 3/8" fuel bung is normally placed on the front left side of the tank, we can supply a matching Pingel valve.

The tank comes with two mounting studs on the bottom and an insert in the back. You will need to weld some mounting points onto the frame. Of course, you can also fabricate a tank strap, the original tank was mounted this way. Please discuss your preferences with your sales rep at the time of the order.

Price

HDSXR7502
We designed this XR750 conversion seat so you don't have to do the fabrication that is necessary to install the original race item below.
This seat has an under seat storage compartment and a taillight/licenseplate bracket integrated into it's design.

Price

HDSXR7502UP
Upholstery pan for HDSXR7502. Covers up the access hole for the storage compartment.

Price

Sportster Cafe Racer

CLUB3B - 1" Wide / Black clubman handlebars
You asked and now you will receive... Airtech wide clubmans in a 1" bar diameter to fit your Sportster.

Black finish.

Width between bars: 11"
Rise: -3.5"
Pull back: 2.5"
Bar length: 9.25"
Diameter: 1 "
Overall width: 28.75"

Price

CLUB3C - 1" Wide / Chrome clubman handlebars
You asked and now you will receive... Airtech wide clubmans in a 1" bar diameter to fit your Sportster.

Chrome finish.

Width between bars: 11"
Rise: -3.5"
Pull back: 2.5"
Bar length: 9.25"
Diameter: 1"
Overall width: 28.75"

Price

XLCS
Harley XL cafe seat
This is a Harley XL Superbike seat for those that want a cool cafe tail for their Sportster that is different from the XLCR. it's got a nice flat mounting surface on the back for a taillight of your choice.

Price

XLCR Conversion kit

 

XLCR883F
Harley XLCR cafe quarter fairing for Sportster
Comes with a molded in dash panel to accomodate a single gauge.

Price

XLCR883S
Harley XLCR seat for Sportster

This cool XLCR conversion tail has a molded in taillight bracket / license plate holder.

This seat will work on 1986 thru '03 Sporsters. On '96 and later models you will need to modify the chassis by cutting off the welded on rear fender support struts.

Price

XLCR883T
Harley XLCR tank for Sportster
We've adapted the stock XLCR tank to fit the Sportster frame. Comes with a 3/8" NPT bung to work with a Pingel fuel valve.

Price

Please note! This gas tank is not recommended for street use, this is a fiberglass gas tank that will not dent.  In the event of a crash, the gas tank may rupture and spill fuel possibly catching your motorcycle on fire. This gas tank is recommended for racing purposes, with racing fuel only! Read more...

XLCR883K
Harley XLCR Conversion kit Sportster
Quarter fairing, tank and seat together for one great price!

Price

Air filter covers

HDAFC1
Air filter cover - Oval
Fits Sportster / Buell

Price

HDAFC2
Air filter cover - Late model Keihin

Price

HDAFC3
Air filter cover - Mikuni 40mm

Price

HDAFC4
Air filter cover - Late Mikuni CV style

Price

HDAFC5
Air filter cover - Triangle

Price

HDAFC6
Air filter cover - Mikuni HS 42mm to stock backing plate

Price

HDAFC7
Air filter cover - Mikuni clamp-on filter

Price

HDAFC8
Air filter cover - S&S with dimple

Price

HDAFC9
Air filter cover - S&S without dimple

Price

HDAFC10
Air filter cover - S&S with intake

Price

HDAFC11
Air filter cover - S&S with intake scoop

Price

HDAFC12
Air filter cover S&S round-oval style

Price

HDAFC13
Air filter cover - Short scoop style
Fits stock Harley air filters with a center mount.

Price

HDAFC14
Air filter cover - Long scoop style
Fits stock Harley air filters with a center mount.

Price

HDAFC15
Air filter cover - Police siren style
This air filter kit comes complete with a UNI filter. You will have to carefully cut out the slots in the air filter cover with a Dremel-type tool.

Price

Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
HARLEY DAVIDSON SPORTSTER
HDSF1 SPORTSTER QUARTER FAIRING $131.00
HDS1 SPORTSTER FRONT FENDER $62.25
HDFF2 HARLEY FRONT  FENDER - WIDE $62.25
UFF1 UNIVERSAL FRONT FENDER - INVERTED FORK 120/17 $62.25
HDWGH1 WIDE GLIDE HEADLIGHT NACELLE WITH TURN SIGNAL MNTS. $179.00
HDWGH2 WIDE GLIDE HEADLIGHT NACELLE - NO TURN SIGNAL MNTS. $179.00
HDSMCC SPORTSTER MASTER CYLINDER COVER $79.00
HDSBBC SPORTSTER BATTERY BOX COVER $79.00
HDSOTC SPORTSTER OIL TANK COVER $79.00
HDST1 SPORTSTER TEARDROP FUEL TANK $653.28
XR750 DIRT TRACK CONVERSION
HDSXRDTT SPORSTER XR750 DIRT TRACK CONVERSION TANK $501.13
HDSXRDTS SPORSTER XR750 DIRT TRACK CONVERSION SEAT $221.31
XR7502DT SPORSTER XR750 DIRT TRACK RACING SEAT $103.75
XR750 TT ROAD RACE CONVERSION
HDSXR7505 SPORSTER XR750 ROAD RACE CONVERSION TANK - SMALL 5GL $653.28
HDSXR75065 SPORSTER XR750 ROAD RACE CONVERSION TANK - LARGE 6.5GL $653.28
HDSXR7502 SPORSTER XR750 ROAD RACE CONVERSION SEAT $259.08
HDSXR7502UP SPORSTER XR750 ROAD RACE UPHOLSTERY PAN $38.72
SPORTSTER CAFE PARTS
CLUB3C CLUBMAN HANDLEBARS 1" WIDE - CHROME $59.00
CLUB3B CLUBMAN HANDLEBARS 1" WIDE - BLACK $59.00
XLCS HARLEY SPORTSTER SPRINT CAFE SEAT $159.08
XLCR CONVERSION KIT
XLCR883S HARLEY SPORTSTER XLCR CONVERSION CAFE SEAT $221.31
XLCR883T HARLEY SPORTSTER XLCR CONVERSION FUEL TANK $653.28
XLCR883K HARLEY SPORTSTER XLCR CONVERSION CONVERSION KIT $896.30
AIR FILTER COVERS
HDAFC1 AIR FILTER COVER - OVAL $72.45
HDAFC2 AIR FILTER COVER - ATE KEIHIN $72.45
HDAFC3 AIR FILTER COVER - 40MM MIKUNI $72.45
HDAFC4 AIR FILTER COVER - LATE CV AIR FILTER COVER $72.45
HDAFC5 AIR FILTER COVER - TRIANGLE AIR FILTER COVER $72.45
HDAFC6 AIR FILTER COVER - HS42 MM MIKUNI TO STOCK FILTER BACK $72.45
HDAFC7 AIR FILTER COVER - MIKUNI CLAMP-ON FILTER COVER $72.45
HDAFC8 AIR FILTER COVERS - S&S WITH DIMPLE $72.45
HDAFC9 AIR FILTER COVER - S&S WITHOUT DIMPLE $72.45
HDAFC10 AIR FILTER COVER - S&S WITH INTAKE $72.45
HDAFC11 AIR FILTER COVER - S&S WITH INTAKE SCOOP $72.45
HDAFC12 AIR FILTER COVER - S&S ROUND-OVAL STYLE $72.45
HDAFC13 AIR FILTER COVER - SHORT SCOOP STYLE $72.45

HDAFC14

AIR FILTER COVER - LONG SCOOP STYLE $72.45
HDAFC15 AIR FILTER COVER - POLICE SIREN STYLE $99.75

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices