GSXR 750 DRAGBIKE '88-'92

All Prices are listed at the bottom of the page

If you are currently, or are planning to drag race your stock GSXR 750, we have got the body you need. On this particular model we started with a '91-'92 750 Superbike upper and made the right and left lowers. Those lowers are cut off at the frame rails so you can slam your bike to the ground.

We made an exhaust pipe bulge on the right lower to clear a pro race pipe and finished the lowers with a one inch return underneath them so you can attach a belly pan to them.

The body started off with a superbike fuel tank that we hollowed out and installed a 3qt. fuel cell in the bottom, and then attached a 4" stretch to the seat also incorporating the dual step seat and rear fenderette. We also offer just the stretched seat if you want to run your stock fuel tank.

This is definitely the coolest bodywork for the oil cooled GSXR. Call us today!

4GSXR751C
Suzuki GSXR 750 competition upper fairing

The turn signal holes and headlight opening have been filled in.

Price

PGSXR3
Suzuki GSXR 750 dragbike lower
- right
These lowers are cut off at the frame rails so you can slam your bike to the ground. We made an exhaust pipe bulge on the right lower to clear a pro race pipe and finished the lowers with a one inch return underneath them so you can attach a belly pan to them.

Price

PGSXR4
Suzuki GSXR 750 dragbike lower - left

Those lowers are cut off at the frame rails so you can slam your bike to the ground. We made an exhaust pipe bulge on the right lower to clear a pro race pipe and finished the lowers with a one inch return underneath them so you can attach a belly pan to them.

Price

PGSXR2
Suzuki GSXR 750 Drag Bike Body
+4"
The body started off with a superbike fuel tank that we hollowed out and installed a 3qt. (2.8l) fuel cell in the bottom, and then attached a 4" stretch to the seat also incorporating the dual step seat and rear fenderette. We also offer just the stretched seat (see below) if you want to run your stock fuel tank.

Price

PGSXR1
Suzuki GSXR 750 Stretched Drag Bike Tail +4"

The same style as the body shown above, but without the fuel tank. Works with stock fuel tank. 4" stretch.

Price

Universal Dragbike Wheel tub - small tire 8"

Price


Notice:

Please note these very important items!

  • We sell an unfinished unpainted product, it is your responsibility to sand, finish, and paint the parts you buy from us.
  • The parts we sell are un-drilled; it is your responsibility to drill all of the mounting holes and fit the parts onto your chassis.
  • All of our parts may or may not include the internal mounting tabs. Please consult with our sales representative if you have any questions about mounting things like headlights and dashes.
  • It is the purchasers' responsibility to mount all of the products they purchase onto their machine. If you need assistance mounting these products call our sales reps for advise.

Part #
Description
Retail
SUZUKI GSXR 750 '88-'92 DRAGBIKE PRODUCTION CHASSIS
4GSXR71C SUZUKI GSXR 750 UPPER FAIRING - COMPETITION $178.23
PGSXR3 SUZUKI GSXR 750 DRAGBIKE LOWER - RIGHT $200.56
PGSXR4 SUZUKI GSXR 750 DRAGBIKE LOWER - LEFT $200.56
PGSXR2 SUZUKI GSXR 750 DRAGBIKE BODY +4" $493.55
PGSXR1 SUZUKI GSXR 750 STRETCHED DRAGBIKE TAIL SECTION +4" $228.24
DBWT1 UNIVERSAL DRAGBIKE WHEEL TUB - SMALL TIRE 8" $178.23

Looking for some Suzuki GSXR bodywork or a Hayabusa fairing? Take a look at our extensive collection. Airtech carries a full selection of street and track fairings for most bikes!

To order call 760-598-3366 NOW!

Home | About Our Products | Copyright | Prices